Thank you for buying the New PXD Tool.
This manual is designed to provide you with the basic knowledge required to operate and maintain your bolting
equipment. Please read this manual carefully and follow the instructions provided.
SAFETY PRECAUTIONS
Hydraulic Torque Wrench is a power tool enables the user to more easily accomplish bolting tasks with increased force, accuracy and efficiency.
It is due to the powered nature of the tools, with large forces generated from high pressure fluid/air applied to a variety of applications, that
adherence to strict safety issues through the proper design and documented use for tools. However, the user must accept the primary
responsibility of safety when using tools by reading, understanding and complying with all operating instructions prior to and during operation.
This manual and additional safety related services are designed to assist in the proper training for use and care of tools and play a major role in
preventing accidents or personal injury and increasing safety.
The following safety related operating instructions and tips are documented in the manual will assist you:
WHILE PLACING TOOL IN SERVICE
· Follow International Standards Safety Code of Hydraulic Rams and Jacks for operate, inspect and maintain this Hydraulic torque
wrench.
· This Hydraulic torque wrench is operated by connecting to hydraulic power pack. The Hydraulic power pack can be driven by
pneumatically or electrically. Before using the Hydraulic torque wrench read and follows the safety instructions given in pump manual.
· Use Hydraulic power pack which is generating 10,000 psi (681 bars) maximum pressure for the operation of this Hydraulic torque
wrench.
· Use Twin Line Hydraulic hose rated for 10,000 psi (681 bars) pressure having safety ratings of 4:1 with this tool.
· Use High Pressure Quick releasing couplers for quick connection of Hydraulic torque wrench to the hose and pump. Make sure that
the spring-loaded retaining rings are fully engaged and the safety rings are tightly threaded against the spring-loaded retaining
rings to prevent the connectors from disengaging under pressure.
· Never interchange male female High Pressure Quick Releasing Couplers fitted on Hydraulic torque Wrench or on the hose. Reversing
the high pressure coupler fittings will reverse the power stroke cycle and may damage the Hydraulic torque wrench.
· Check for damaged, worn or deteriorated hoses and fittings. Make sure that the hoses are being used are pressure tested and Approved
by International Standard.
· Before starts operating check the oil level in the reservoir of Hydraulic power pack, refill, replenish the oil if required.
Safety Precautions
2
PXD Series Operation Manual
To Next Page
Loading...
Need help?
General
