12
GB
Problem Solution
The indication light is
not lit
If the indication light on the front of the mat fails
to glow at all, a proper connection between the
Powermat Mat and your device has not been
made.
Re-align the center of the Powermat Receiver
with the Power Access Point on your Powermat
Mat until the light glows.
The indication light is
flashing
If the light flashes on and off instead of emitting
a steady glow, the connection is incomplete.
Keep adjusting the position of your Powermat
Receiver until you see a steady light. When the
light emits a steady glow, proper positioning has
been achieved and charging will begin.
No magnetic lock
Magnetic lock is achieved when the device and
Power Access Point are properly aligned. Re-
align the Powermat Receiver with the Power
Access Point on your Powermat Mat until a
physical lock is achieved.
To Next Page
Loading...