8
GB
THE POWERMAT “HANDSHAKE”
When a Powermat enabled device is properly positioned on a Powermat Mat, an
automatic “handshake” process will take place during which the Powermat Mat
will recognize the Powermat Receiver and activate the Powermat Access Point.
(NOTE: Non-enabled devices will not cause activation.) This process ensures that
the proper power is given to your device. Also, this communication allows the
mat to stop delivering power when the device is fully charged. This energy
efficient process is unique to every access point on the mat, meaning that the
mat will address the charging needs of each device independently. The mat will
also stop charging each device as soon as that device is fully charged while
continuing to charge all remaining devices.
Note: The light may come on and go off after approximately fifteen (15) seconds
if the mat confirms that a device is fully charged.
PRODUCT SPECIFICATIONS
• Operational Temperature 32° - 104°F (0° - 40°C)
• Humidity Range 0% - 90% non condensing
To Next Page
Loading...