IN THE BOX
– Powermat 2X
– Powermat Power Adapter
– Powermat Powercube Universal Receiver
– Tip Storage
– Assorted Tips
– Owner’s Manual
NOTE: Powermat Receivers sold separately
QUICK 4 STEP OPERATION
1. Connect the Powermat 2X to the Power Adapter (included).
2. Plug the Power Adapter into a 100-240V AC electrical outlet.
3. Enable your portable electronic device with a Powermat Receiver
(sold separately).
4. Place your Powermat-enabled device onto the Powermat 2X.
To switch the unit off press the wall socket switch to “off” and remove the power
supply. The plug connector is the disconnect device. Remember to remove the
plug connector from the wall. Do not leave the plug connector in the socket
after use as this shall remain readily operable.
NOTE: For compatible devices and Powermat Receivers, please visit
http://www.powermat.com
2
GB
To Next Page
Loading...