To Next Page
S
Sharon HansonAug 1, 2025
What to do if Powermat Paint Sprayer spray pattern is distorted?
- FfericksonAug 1, 2025
If the spray pattern from your Powermat Paint Sprayer is distorted or stops completely, release the trigger and lock the gun. Then, rotate the reversible tip arrow 180º so that the point of the arrow is in the rear of the gun (CLEAN position). Next, slow the trigger and lock the gun, rotating the reversible tip arrow 180º again to the CLEAN position. If the sprayer is under pressure, it can be very difficult to turn. Turn the knob from PRIME / SPRAY to ON PRIME, run the gun, and the tip will turn more easily.
General
