EasyManuals Logo

Powermate P010-0037SP User Manual

Powermate P010-0037SP
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1 - ENG
200-3015, Rev. A, 6/15/15
HVLP Gravity Feed Spray Gun Instruction Manual
Mode d’emploi du pistolet pulvérisateur avec alimentation par
gravité HVLP (grand volume/basse pression)
Manual de instrucciones para la pistola rociadora de aliment-
ación por gravedad HVLP
Read and understand all safety precautions in this manual before operating. Failure to
comply with instructions in this manual could result in personal injury, property damage and/or voiding of
your warranty. The manufacturer WILL NOT be liable for any damage because of failure to follow these
instructions.
Lisez et veillez à bien comprendre toutes les consignes de sécurité de ce
manuel avant d’utiliser l’appareil. Toute dérogation aux instructions contenues dans ce manuel peut
entraîner l’annulation de la garantie, causer des blessures et/ou des dégâts matériels. Le fabricant NE
SAURA être tenu responsable de dommages résultant de l’inobservation de ces instructions.
Lea y comprenda todas las precauciones de seguridad contenidas en este
manual antes de utilizar esta unidad. Si no cumple con las instrucciones de este manual podría ocasionar
lesiones personales, daños a la propiedad y/o la anulación de su garantía. El fabricante NO SERÁ
responsable de ningún daño por no acatar estas instrucciones.
Model No.
P010-0037SP
TOOL SPECIFICATIONS
CARACTÉRISTIQUES DE L’OUTIL
ESPECIFICACIONES DE LA HERRAMIENTA
Nozzle size 1.4 mm
Cup Capacity .63 Quart
Average air consumption 7.5-9.5 SCFM @ 40 PSI
Operating Pressure Do not exceed 50 PSI
Average air Inlet 1/4” NPS
Taille de buse 1,4 mm
Capacité de récipient 0,95 litre
Consommation moyenne
d’air
0.14-0.22 m3/min
Pressionde de service Ne pas excéder 345 kPa
(50 PSI)
Entrée moyenne d’air 6,3 mm NPS
Tamaño de boquilla 1,4 mm
Capacidad del recipiente 0,95 litro
Consumo mediano de
aire
0.14-0.22 m3/min
Presión de trabajo No exceda 345 kPa (50 PSI)
Entrada mediana de aire 6,3 mm NPS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Powermate P010-0037SP and is the answer not in the manual?

Powermate P010-0037SP Specifications

General IconGeneral
BrandPowermate
ModelP010-0037SP
CategoryPaint Sprayer
LanguageEnglish

Related product manuals