To Next PageTo Next Page
Need help?Do you have a question about the Powermate PLA4708065 and is the answer not in the manual?
Explains Danger, Warning, and Caution symbols used in the manual.
Covers fire, explosion, electrical shock, injury, and burn hazards.
Details requirements for masks, goggles, and hearing protection.
Addresses breathing, lead exposure, tank safety, and electrical wiring.
Defines CFM (airflow) and PSI (pressure).
Explains cut-in and cut-out pressure for automatic motor control.
Defines well-ventilated areas and dedicated circuits.
Identifies and explains the function of the motor, pump, tank, and pressure switch.
Instructions for unpacking, inspecting, and preparing the unit.
Advises on location for optimal performance, ventilation, and cold climates.
Illustrates air line components like dryers, filters, regulators, and lubricators.
Covers moisture removal, air pressure regulation, and lubrication.
Details manual power control and automatic start/stop via pressure switch.
Explains the function of the tank safety valve and pressure release valve.
Describes the gauge that measures air pressure inside the tank.
Explains the automatic shutdown and reset procedure for motor overloads.
Guides on proper wiring, circuit protection, and grounding for safety.
Discusses causes and effects of low voltage on compressor starting and operation.
Outlines the initial 30-minute run-in process for the pump.
Details the steps for daily operation and automatic pressure control.
Provides advice for starting the compressor in cold weather conditions.
Explains how to safely turn off the compressor and relieve pressure.
Covers daily draining of condensation and checking pump oil levels.
Details how to drain old oil and refill with new synthetic oil.
Explains how to adjust belt tension and align pulleys for optimal performance.
Guides on replacing drive belts and servicing the check valve.
Covers cleaning air filters, checking relief valve, and testing for leaks.
Provides instructions for preparing the compressor for long-term storage.
Lists recommended maintenance checks at daily, monthly, and annual intervals.
Identifies issues like stalling, low pressure, knocking, and provides causes and remedies.
Information on how to order replacement parts from authorized centers.
Provides contact details for service centers and customer support.
Explains Danger, Warning, and Caution symbols used in the manual.
Covers fire, explosion, electrical shock, injury, and burn hazards.
Details requirements for masks, goggles, and hearing protection.
Addresses breathing, lead exposure, tank safety, and electrical wiring.
Defines CFM (airflow) and PSI (pressure).
Explains cut-in and cut-out pressure for automatic motor control.
Defines well-ventilated areas and dedicated circuits.
Identifies and explains the function of the motor, pump, tank, and pressure switch.
Instructions for unpacking, inspecting, and preparing the unit.
Advises on location for optimal performance, ventilation, and cold climates.
Illustrates air line components like dryers, filters, regulators, and lubricators.
Covers moisture removal, air pressure regulation, and lubrication.
Details manual power control and automatic start/stop via pressure switch.
Explains the function of the tank safety valve and pressure release valve.
Describes the gauge that measures air pressure inside the tank.
Explains the automatic shutdown and reset procedure for motor overloads.
Guides on proper wiring, circuit protection, and grounding for safety.
Discusses causes and effects of low voltage on compressor starting and operation.
Outlines the initial 30-minute run-in process for the pump.
Details the steps for daily operation and automatic pressure control.
Provides advice for starting the compressor in cold weather conditions.
Explains how to safely turn off the compressor and relieve pressure.
Covers daily draining of condensation and checking pump oil levels.
Details how to drain old oil and refill with new synthetic oil.
Explains how to adjust belt tension and align pulleys for optimal performance.
Guides on replacing drive belts and servicing the check valve.
Covers cleaning air filters, checking relief valve, and testing for leaks.
Provides instructions for preparing the compressor for long-term storage.
Lists recommended maintenance checks at daily, monthly, and annual intervals.
Identifies issues like stalling, low pressure, knocking, and provides causes and remedies.
Information on how to order replacement parts from authorized centers.
Provides contact details for service centers and customer support.
General| Brand | Powermate |
|---|---|
| Model | PLA4708065 |
| Category | Air Compressor |
| Language | English |
