8. Turn off the engine
If you want to stop the engine urgently, turn the switch of the engine to the
“CLOSE” position.
Normal use:
1. Turn off all the installations that are connected, and unplug the plug (Fig. B).
2. Turn the switch (Fig. C) of the plug to the “OFF” position.
3. After the engine is totally cooled, turn the ventilating pole of the
gasoline-burning lid to the “CLOSE” position counter-clockwise (Fig. D).
Look out
When you turn off, convey, and store the engine, make sure that the switches
of the ventilating pole of the gasoline-burning lid and the engine are on the
“CLOSE” position.
To Next Page
Loading...
