EasyManua.ls Logo

Powermate PMi 2000 - Examine and Repair the Breakdown; Troubleshooting Engine Start Issues; Troubleshooting Power Output Issues; Troubleshooting DC Socket Issues

Powermate PMi 2000
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-
30
11. Examine and repair the breakdown
If the engine can not be started:
Does the gasoline tank still have gasoline? → If not, fill gasoline into the gasoline tank.
↓yes
Is the switch of the generator on the “open” position→ If not, switch on the engine.
↓yes
Is there enough machine oil in the engine? → If not, add enough machine oil
↓yes
Is there any spark outside the spark plug? → If not, change the spark plug → If not, send the generator to
the authorized agent.
Warning
Make sure that there is no gasoline spilling out of the spark plug. The overflowed
gasoline may catch fire.
Examination:
1 Dismantle the spark plug, clean out the filth around it.
2 Dismantle the spark plug, enclose it into the cover of it.
3 Earth the side pole on the lid of the air cylinder.
4 When you pull the starting hold, the spark must spray from the clearance.
↓yes
If the engine still can not be started, send the generator to the authorized agent.
If the engine can not be started:
Does the outputting indicator light lighten? → If not, fill oil into the oil tank
↓no
Does the overloading indicator light lighten?
↓ No
Examine whether the electrical equipment or installations have any breakdown? → If not, send the
generator to the authorized agent
No electric power in the direct current socket:
Is the defender of the direct circuit open? → If not, open the defender of the direct circuit
→→→→→ If yes, send the generator to the authorized agent.

Related product manuals