EasyManua.ls Logo

Powermate PRTT212 User Manual

Powermate PRTT212
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
If you need assistance or have any questions,
CALL TOLL FREE: 1-800-737-2112
Look inside for:
Page
Safety Definitions ................................1
Important Safety Information ......................2-4
Product Specifications ............................5
Parts & Features ................................5
Safety Decals ...................................6
Assembly .....................................7-8
Engine Preparation...............................9
Operation ....................................10-14
Maintenance..................................15-18
Technical Service .............................. 18
Troubleshooting ............................... 19
Warranty ...................................... 20
05/07/2019 Printed in China A203874
Operator’s Manual
REAR TINE
ROTARY TILLER
KEEP THIS MANUAL FOR FUTURE REFERENCE
Model Nos. PRTT212
Record the following for future reference:
Mfg. Date Code: ____________________
Date of Purchase: ___________Attach a copy of your sales receipt.
Consumer Toll Free Number: 1-800-737-2112
Refer to the website for electronic manual and parts book.
www.powermateoutdoor.com
IMPORTANT:
Thank you for purchasing this Powermate® Tiller.
This manual provides complete instructions for safely operating and maintaining your tiller. Read and save these
instructions. Refer to this manual each time before using your tiller.
CONTAINS LEAD. May be harmful if eaten or chewed. May generate dust containing lead. Wash hands after use. Keep
out of reach of children.
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and
birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
WARNING
WARNING

Questions and Answers:

Powermate PRTT212 Specifications

General IconGeneral
Engine Displacement212cc
Starting SystemRecoil
Tine LocationRear
Number of Tines4
Forward Speeds1
Reverse Speeds1
Wheel Size8 inches
Engine Type4-Cycle OHV

Summary

Safety Definitions

Safety Alert Symbols

Explains symbols used to alert operators of potential safety hazards.

Safety Warning Symbols

Details symbols found on the tiller for important safety precautions.

Control and Operating Symbols

Describes symbols related to the tiller's controls and operation.

Important Safety Information

Responsibility of Operator

Outlines the duties and responsibilities of the tiller operator for safe use.

Preparation Safety

Details safety precautions to take before starting the tiller operation.

Operation Safety

Covers essential safety measures to follow while operating the tiller.

Fuel Safety

Storage Safety

Repair, Maintenance, and Adjustment Safety

Children Safety

Product Specifications

Parts & Features

Safety Decals

Assembly

How to Remove Tiller from Carton

Step-by-step instructions for safely unpacking the tiller from its packaging.

Install the Wheels

Guides the user through the process of attaching the tiller's wheels correctly.

Install the Depth Regulator

Explains how to install the depth regulator mechanism onto the tiller.

Handle Assembly

Attach Lower Handle

Instructions for attaching the lower section of the tiller's handle assembly.

Attach Upper Handle

Instructions for attaching the upper section of the tiller's handle assembly.

Engine Preparation

Engine Oil

Details the type, capacity, and checking procedure for engine oil.

How to Check Oil Level and Fill to Proper Level

Step-by-step instructions for checking and filling the engine oil to the correct level.

Operation: Pre-Start and Start-Up

Pre-Start Inspection

Checklist of essential inspections to perform before starting the tiller's engine.

Start-Up

Procedures for starting the tiller's engine, including cold and warm starts.

Operation: Controls and Tilling

Idle Speed

Guidance on using the low throttle position for reduced engine stress and noise.

Operating Speed

Recommendation for setting throttle lever for normal tilling operations.

Shutting Down

Instructions on how to properly stop the tiller's engine and moving parts.

Tilling

Procedures for adjusting depth and engaging the tiller for tilling operations.

Operation: Drive Safety Control Levers

Drive Safety Control Levers

Explains the function and operation of forward and reverse drive levers for safety.

Operation: Adjustments

Adjustments

Details how to adjust wheel locks, handlebar height, and depth regulator.

Operation: Tilling and Cultivating Tips

Tilling Tips

Provides advice for successful tilling, including depth adjustment and handling obstacles.

Cultivating Tips

Offers guidance on using the tiller for cultivating tasks and weed control.

Maintenance Schedule

Servicing the Tiller: Belts

Engine and Transmission Maintenance

Engine Maintenance

Covers regular engine checks, oil changes, and air filter service.

Transmission Oil

Procedures for checking and filling the tiller's transmission oil level.

Tire Pressure

Recommended tire pressure and its importance for tiller performance.

Lubrication

Guidance on lubricating moving mechanical parts at specified intervals.

How to Prepare for Storage

Technical Service

Troubleshooting

Engine Problems

Lists common engine issues and their solutions for starting and running.

Tines Not Rotating

Addresses causes and solutions when the tiller's tines fail to rotate.

Engine Not Stopping

Solutions for issues where the engine fails to shut off properly.

Tines Not Cutting Properly

Explains why tines might not cut effectively and how to fix it.

Warranty

Related product manuals