To Next PageTo Next Page
Need help?Do you have a question about the Powermatic 1791310 and is the answer not in the manual?
General| Style | Floor |
|---|---|
| Motor Power | 1 HP |
| Spindle Taper | MT-2 |
| Swing | 20 inches |
| Spindle Speed | 150 to 4200 RPM |
General warranty duration for Powermatic products.
Identifies the initial purchaser as the covered party.
Details defects in workmanship/materials, excluding misuse and wear.
Outlines limitations on commercial use and specific exclusions.
Provides contact information and process for technical assistance.
Lists product types and their respective warranty durations.
Instructions on loosening gib screws to allow head movement.
Explains the importance of proper clearance between chisel and auger.
Guides on selecting the correct number of spacers for chisel fit.
Details on how the mortiser operates at different voltages.
Safety and connection guidelines for electrical power.
Steps to set the depth stop for consistent boring operations.
How to reposition the spring-loaded operating handle.
Steps to adjust the fence forward or backward.
Two methods for using the hold-down clamp to secure workpieces.
Basic cleaning and upkeep recommendations.
Guide on keeping the chisel and auger sharp for optimal performance.
Details on lubricating gears, racks, and pivot points.
Advice on storing the mortiser for extended periods.
