Powermatic 2042377 User Manual

Mobile Base Instructions
Unpacking
Open shipping container and check that all parts
are intact. Report any damage immediately to
your distributor.
The small mobile base requires no assembly. The
extended mobile base requires minor assembly.
Assembly of Extended Mobile Base
The extended mobile base is shipped with one
piece flipped on top of the other. To separate
them, place your foot on the lower bar and lift up
on the two sides. See Figure 1.
A
ttach the two pieces with four screws, eight flat
washers, and four hex nuts (provided), as shown
in Figure 2. A 9/16" wrench is required.
Operation
Lock all casters before
operating machine.
To lock a swivel caster, press locking lever down
with foot (Figure 3). Press opposite end of lever to
unlock.
To lock a rigid caster, rotate caster locking knob
clockwise (Figure 4).
Figure 3
Figure 1
Figure 2
Figure 4
Part No. M-0460287
Revision F4 01/2014
Copyright © 2014 Powermatic, a Division of JPW Industries, Inc.

Powermatic 2042377 Specifications

General

Brand	Powermatic
Model	2042377
Category	Outdoor Cart
Language	English

Summary

Powermatic Mobile Base Instructions

Unpacking and Initial Inspection

Inspect the shipping container and all parts for damage upon receipt and report any issues immediately.

Extended Mobile Base Assembly

Assemble the extended mobile base by connecting its two pieces using screws, washers, and hex nuts.

Mobile Base Operation and Locking

Instructions for locking swivel casters via a foot lever and rigid casters via a locking knob.

Powermatic Mobile Base Specifications and Parts

Mobile Base Model Compatibility and Dimensions

Details specifications, dimensions, and compatibility for various Powermatic mobile base models.

Part Re-ordering Information

Contact information and procedure for ordering replacement parts for mobile bases and casters.