PowerNet V001 - Assembly Instructions: Base Frame and Poles; Step 1: Unfold Base Frame; Step 2: Secure Base Frame Legs; Step 3: Insert Lower Poles

3. Insert Lower Pole into Base Frame
post holder. Repeat on opposite
side. (Locations B and D)
3.
INSTRUCTIONS
1. Unfold the Base
Frame to widen the
center frame.
2. Open Base Frame legs until button snaps into
place. Repeat on opposite side.
PARTS LIST
(1) LARGE NET
(1) SMALL NET
(1) BASE FRAME
(2) UPPER BACK POLES
(2) UPPER FRONT POLES
(6) LOWER POLES
(1) BAG
1.
2.
Out Work! Out Play!