EasyManua.ls Logo

Powersmart MB5040A - Page 27

Powersmart MB5040A
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When transporting:
•Do not overfill the tank.
•Do not operate the generating set while it is on vehicle. Take the generating set
off the vehicle and use it in a well-ventilated place. Avoid a place exposed to
direct sunlight when putting the generating set on a vehicle. If the generating set is
left in an enclosed vehicle for many hours, high temperature inside the vehicle
could cause fuel to vaporize resulting in a possible explosion.
•Do not drive on a rough road for an extende
d period with the gener
ating set on a
rough road, drain the fuel from the generating set beforehand.
27
Step1: Loosen 2 fixed bolts on the inverter. Step2: Loosen 2 fixed bolts on the control panel.
Step3: Pull apart the panel slowly. Step4: Loosen 3 bolts on the recoil starter.
1
3
4
2
How to replace the recoil starter in steps

Related product manuals