10
ASSEMBLY INSTRUCTION
WARNING:
Do not use this product if any parts on the packing list are already assembled to your product
when you unpack it. Parts on this list are not assembled to the product by the manufacturer
and require customer installation. Use of a product that may have been improperly assembled
could result in serious personal injury.
WARNING:
If any parts are damaged or missing do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create accessories not recommended for use with
this product. Any such alteration or modification is misuse and could result in a hazardous
condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
1. Install coupling for water connection (Fig.2). Screw the coupling to the water connection on the
appliance.
2. Install high pressure hose (Fig.3 and Fig.4)
Insert the high pressure hose tightly in to coupling on the appliance, it will lock in audibly.
Note: make sure the connection nipple is aligned correctly. Check the secure connection by pulling
on the high pressure hose.
3. Install the storage of trigger gun (Fig.5). Insert the storage of trigger gun and push down all the way.
4. Install spray lance (Fig.6). Push the spray lance into the trigger gun and fasten it by turning it through
90 degree.
To Next Page
Loading...
