Powersmart PS22 - Assembly and Adjustments; Unpacking; Connecting the High-Pressure Hose

8
ASSEMBLY AND ADJUSTMENTS
Unpacking
Unpack the pressure washer and all its parts, and compare against the list below. Do not discard the
carton or any packaging until the pressure washer is completely assembled.
1
Gun
2
Adjustable wand
3
Inlet quick connector
4
Detergent kit (not shown)
Connect high pressure hose
1. Connect the 35 feet high pressure hose to the water outlet (1) on
the pressure washer.
2. Connect another end of high pressure hose to the gun.
1
2
3
1