How to troubleshoot a Powersmart PS76140A that will not start?
If your Powersmart Cordless Saw won't start, there could be a couple of reasons. First, make sure the battery pack is correctly installed. If it is, the battery pack might not be charged. In that case, you should check the battery pack charging requirements.
Why is my Powersmart PS76140A Cordless Saw battery pack not charging?
If the battery pack of your Powersmart Cordless Saw isn't charging, try these steps: * Ensure the battery pack is fully inserted into the charger until the LED indicator appears. * Verify the charger is plugged into a working outlet. * Check the surrounding air temperature; it should be between 40 degrees F (4.5°C) and 105 degrees F (+40.5°C). Move the charger and battery if the temperature is outside this range.
What to do if my Powersmart PS76140A Cordless Saw shuts off abruptly?
Your Powersmart Cordless Saw might shut off abruptly due to two primary reasons. One, the battery pack may have reached its maximum thermal limit, in which case you should allow the battery pack to cool down. Two, the battery may be out of charge. Place it on the charger to recharge.
General| Type | Cordless Chainsaw |
|---|---|
| Power Source | Battery |
| Voltage | 40V |
| Bar Length | 14 inches |
| Chain Pitch | 3/8 inch |
| Chain Gauge | 0.050 inch |
Details on voltage, speed, cutting capacity, battery type, and dimensions for the cordless jig saw.
Explains safety alert symbols and defines hazard signal words like DANGER, WARNING, and CAUTION.
Instructions for the proper use, maintenance, and care of the power tool.
Guidelines for charging, handling, and maintaining the battery pack for optimal performance and safety.
Essential safety measures specific to operating a cordless jig saw, including handling and protective gear.
Guidelines for charging the battery pack, including initial charge and LED indicators.
Common problems like unit not starting or battery not charging, with possible causes and solutions.
Details the warranty period, coverage limitations, and claim procedures for the product.
To Next Page