PowerSmith PLTS07 - Applications and Maintenance; Vertical Applications; Maintenance; Warranty and Support

6
English
wARRANTY
This product is warranted free from defects in material and
workmanship for 2 (Two) years after date of purchase. This
limitedwarrantydoesnotcovernormalwearandtearor
damage from neglect or accident. The original purchaser
iscoveredbythiswarrantyanditisnottransferable.Prior
to returning your product to store location of purchase,
please call the Toll-Free Help Line for possible solutions.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT
COVERED BY THE 2 YEAR WARRANTY.
HELP LINE
ForquestionsaboutthisoranyotherPowerSmith™
product,
Please call Toll-Free: 888-552-8665.
Orvisitourwebsite:
www.powersmithproducts.com
VERTICAL APPLICATIONS
1. Attach the Wall Mount Plate to the tool.
2. Turn the tool on.
3. Positon the tool against the wall. Use the Bubble Vial
(3)tolevelthelaserline.
4. Hold the Wall Mount Plate firmly in place against the
wall,andremovethetoolfromtheWallMountPlate.
5. Attach the Wall Mount Plate to the wall using a small
screworanadhesiveputty.
6. Re-attach the tool to the Wall Mount Plate.
7. UsetheBubbleVialtoproperlylevelthelaserline.
NOTE: To levelthetool,theairbubble mustbe inthe
center of the two black lines.
MAINTENANCE
WARNING: Do not turn the laser on while
cleaning the lens. Serious injury to eyes could result.
• Keepthelaserlensclean.Adirtylenswillaffectthe
laser beam operation. Clean the lens with a moist
cotton swab. Clothes with nylon content could scratch
the lens causing the laser to operate incorrectly.
• Clean the tool housing with a moist cotton cloth.
Use only water. Do Not use cleaners, solvents or
compressed air to clean the tool.
• Neverimmerseorletliquidgetinsidethetool.
• Drythetoolwithacottonlintfreeclothandallowtodry
completely before using or storing the tool.
APPLICATION