EasyManua.ls Logo

PowerStroke PS171433 - User Manual

PowerStroke PS171433
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SAVE THIS MANUAL FOR FUTURE REFERENCE
Ce nettoyeur haute pression a été conçu et fabriqué conformément
aux strictes normes de fiabilité, simplicité d’emploi et sécurité
d’utilisation. Correctement entretenu, il vous donnera des années
de fonctionnement robuste et sans problème.
AVERTISSEMENT :
Pour réduire les risques de
blessures, l’utilisateur doit lire et veiller à bien comprendre
le manuel d’utilisation avant d’utiliser ce produit.
Merci de votre achat.
Su lavadora de presión ha sido diseñada y fabricada de confor-
midad con las estrictas normas para brindar fiabilidad, facilidad
de uso y seguridad para el operador. Con el debido cuidado,
le brindará muchos años de sólido y eficiente funcionamiento.
ADVERTENCIA: Para reducir el riesgo de lesiones,
el usuario debe leer y comprender el manual del operador
antes de usar este producto.
Le agradecemos su compra.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
Your pressure washer has been engineered and manufactured to our high standard for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
1700 PSI ELECTRIC PRESSURE WASHER
NETTOYEUR PRESSION À ÉLECTRIQUE DE 1700 PSI
LAVADORA DE PRESIÓN A ELÉCTRICA DE 1700 PSI
PS171433
(ALL VERSIONS / TOUTES LES VERSIONS / TODAS LAS VERSIONES)
To register your POWERSTROKE product, please visit:
http://register.powerstroketools.com/
Pour enregistrer votre produit de POWERSTROKE, s’il vous
plaît la visite: http://register.powerstroketools.com/
Para registrar su producto de POWERSTROKE, por favor
visita: http://register.powerstroketools.com/
CUSTOMER SERVICE
SERVICE CLIENTELE
SERVICIO AL CLIENTE
USA: 1-877-617-3501
Mexico: 01 800 843 1111
www.powerstroketools.com
DO NOT USE E15 OR E85 FUEL IN THIS UNIT.
IT IS A VIOLATION OF FEDERAL LAW
AND WILL DAMAGE THE UNIT
AND VOID YOUR WARRANTY.
NE PAS UTILISER D’ESSENCE E15 OU E85 DANS CET APPAREIL. UNE
TELLE UTILISATION REPRÉSENTE UNE VIOLATION DE LA LOI FÉDÉRALE ET
ENDOMMAGERA L’APPAREIL ET ANNULERA LA GARANTIE.
NO UTILICE COMBUSTIBLES E15 O E85 EN ESTA UNIDAD.
ESTO CONSTITUYE UNA VIOLACIÓN A LA LEY FEDERAL,
DAÑARÁ LA UNIDAD Y ANULARÁ LA GARANTÍA.

Questions and Answers

  • E
    erikjonesAug 16, 2025
    How to fix PowerStroke PS171433 that won't start?
    • C
      Courtney Patterson MDAug 16, 2025
      If your PowerStroke Pressure Washer doesn't start when you depress the trigger, there are several things to check: * Ensure the power cord is properly connected to a working 120V AC, 60 Hz AC outlet. * Verify that the switch is in the 'on' position. * Check the GFCI plug and press the reset button if it has tripped. * Reset the house or shop circuit breaker if it has tripped. * Make sure the pressure washer is connected to an individual branch circuit only. * If you're using an extension cord, confirm it's heavy enough to handle the pressure washer's current.
  • G
    glennmelissaAug 19, 2025
    What to do if my PowerStroke PS171433 doesn't start when I depress the trigger?
    • J
      jennifer59Aug 19, 2025
      If your PowerStroke Pressure Washer doesn't start when you depress the trigger, here are a few things to check: * Make sure the power cord is connected to a working 120V AC, 60 Hz AC outlet. * Ensure the switch is turned on. * Check the GFCI plug and press the reset button if it's tripped. * Reset the house or shop circuit breaker if it has tripped. * Squeeze the trigger to relieve any water pressure in the hose.
  • T
    ttateAug 22, 2025
    Why is my PowerStroke PS171433 Pressure Washer not reaching high pressure?
    • C
      Christopher JenkinsAug 22, 2025
      If your PowerStroke Pressure Washer isn't reaching high pressure, here's what you should do: * Replace the garden hose with a 3/4 inch garden hose. * Check the garden hose for any kinks, leaks, or blockages that might be restricting the water supply. * Ensure that the water source is fully open to provide enough inlet water.
  • N
    Nicholas LeonardAug 26, 2025
    What to do if PowerStroke PS171433 pump doesn't produce pressure?
    • S
      Sarah PattonAug 26, 2025
      If the pump on your PowerStroke Pressure Washer isn't producing pressure, try the following: 1. Ensure you have an adequate water supply. 2. Check the spray wand for leaks; check connections and replace the wand if necessary. 3. Clean the nozzle to remove any clogs. 4. Squeeze the trigger on the spray wand to remove any air from the line. 5. Remove the water inlet filter, rinse it with warm water, and then replace it in the unit.
  • J
    Jasmine GarciaAug 27, 2025
    Why is there no detergent coming out of my PowerStroke PS171433 Pressure Washer?
    • J
      john68Aug 27, 2025
      If your PowerStroke Pressure Washer isn't dispensing detergent, consider the following: * Add more detergent to the detergent tank if it's empty. * Inspect the garden hose for kinks, leaks, or blockages that might be affecting the water supply. * Make sure you have attached the black soap nozzle.
  • L
    Latasha BallAug 31, 2025
    Why is my PowerStroke Pressure Washer pump not producing pressure?
    • D
      Dennis HughesAug 31, 2025
      If the pump on your PowerStroke Pressure Washer isn't producing pressure, consider the following: 1. Ensure you have an adequate water supply. 2. Check for leaks in the spray wand; tighten connections or replace the wand if necessary. 3. Clean the nozzle to remove any clogs. 4. Squeeze the trigger on the spray wand to remove any air from the line. 5. Remove the water inlet filter, rinse it with warm water, and then replace it.
  • C
    cody96Sep 3, 2025
    How to fix a PowerStroke PS171433 that doesn't reach high pressure?
    • B
      Brittany SalazarSep 3, 2025
      If your PowerStroke Pressure Washer isn't reaching high pressure, try these solutions: * Replace the garden hose with a 3/4 inch garden hose. * Open the water source fully to ensure unrestricted water supply. * Replace the hose if there is not enough inlet water. * Check the garden hose for kinks, leaks, and blockages and eliminate them.
  • V
    Valerie PerkinsSep 5, 2025
    Why is my PowerStroke PS171433 Pressure Washer not dispensing detergent?
    • A
      Angelica HurstSep 6, 2025
      If your PowerStroke Pressure Washer is not dispensing detergent, consider these potential causes: * The detergent tank might be empty; add more detergent. * The water supply might be inadequate or clogged; check the garden hose for kinks, leaks, and blockages. * The wrong nozzle might be attached; attach the blue or black soap nozzle.
  • K
    Kristi CarlsonSep 9, 2025
    How to fix a leaking wand on PowerStroke PS171433 Pressure Washer?
    • C
      Christopher MartinSep 9, 2025
      If your PowerStroke Pressure Washer wand is leaking, the o-ring may need replacing. Replace the o-ring. If replacing the o-ring does not correct the problem, contact your authorized service center to purchase a new wand.
  • J
    james68Sep 12, 2025
    What to do if the wand on my PowerStroke Pressure Washer leaks?
    • G
      George BakerSep 12, 2025
      If the wand on your PowerStroke Pressure Washer is leaking, try replacing the O-ring. If replacing the O-ring does not correct the problem, contact your authorized service center to purchase a new wand.

Summary

Important Safety Instructions

Ground Fault Circuit Interrupter Protection

Explanation of GFCI protection and its importance for preventing electric shock.

Extension Cords Guidelines

Guidelines for selecting and using appropriate extension cords for outdoor use.

Specific Safety Rules

Ground Fault Circuit Interrupter (GFCI) Protection Details

Further details on GFCI usage, polarization, and testing.

Extension Cord Safety and Selection

Specifics on extension cord gauge, condition, and outdoor use ratings.

Electrical Information

Double Insulation

Explanation of double insulation for electrical safety and grounding requirements.

Ground Fault Circuit Interrupter (GFCI) Testing

Instructions for testing and ensuring the GFCI plug is operational.

Operation Guide

General Operation Warnings

Key warnings regarding familiarity, eye protection, attachments, and water stream direction.

Starting and Stopping

Procedure for starting, stopping, and operating the pressure washer safely.

Maintenance Procedures

General Maintenance Precautions

Warnings and guidelines for servicing, cleaning, and using replacement parts.

Troubleshooting Guide

Pressure Washer Does Not Start

Common causes and solutions for the unit failing to start when the trigger is pressed.

Pump Does Not Produce Pressure

Troubleshooting steps for issues with pressure generation.

Machine Does Not Reach High Pressure

Solutions for low pressure issues, including hose and water supply checks.

Limited Warranty Information

PowerStroke PS171433 Specifications

General IconGeneral
BrandPowerStroke
ModelPS171433
CategoryPressure Washer
LanguageEnglish

Related product manuals