PowerTac E9R-G4 User Manual

270 Lumens
4.2 hrs
270 Lumens
5.7 hrs
INTRODUCTION
direct to Strobe function. Using the latest CREE XHP50 LED to produce a maximum of 2550 Lumens. The E9R-G4 is machined from aircraft grade aluminum, which makes it
for law enforcement, outdoor enthusiasts, and EDC. The included tactical holster is perfect for law enforcement, security guards, and soldiers alike. With the ability to mount the
goes to the person who wields the E9R-G4.
USAGE INSTRUCTIONS
1. To install battery: Unscrew tail cap. Insert positive end of the battery
towards LED. Tighten the tail cap till it’s completely closed.
2. To turn the light ON: Push the back switch to click. Once Turned on the
back button to click.
3. To switch light levels: Turn the light on and press the side switch (click).
Press side switch again (click) will cycle to next light level.
side switch or turn light on and hold down side switch (long click, 0.3
seconds). The light will remain on strobe until you switch light levels.
5. Toggle Strobe / High Function: Access direct to strobe function; release
side switch; hold down side switch again (long click) and light will toggle
to high mode. Hold down side witch again (long click) and toggle to
strobe again.
Maintenance
Every 3 months, threads should be wiped with a clean cloth followed by a
thin coating of silicon-based lubricant.
HEAD
POCKET CLIP
SIDE SWITCH
BATTERY TUBEMAGNETIC / MICRO USB
CHARGE PORT
BACK SWITCH
LED Type: Cree XHP50 White LED
Battery: (2) CR123A or (1) 18650 High Discharge Rechargeable Li-ion.
Size: Length: 138 .6mm
Bezel Diameter: 25.4 mm
Body Diameter: 23 mm
Weight: 85g (without battery)
Illumination:
.64 Lumens
50 days
1 x 18650 (3.6V)
(High Discharge)
Rechargeable Battery
2 x CR123A (3.0V)
(High Discharge)
Rechargeable Battery
71 Lumens
20.9 hrs
1135 Lumens
2.11 hrs
790 Lumens
4.81 hrs
.64 Lumens
48 days
71 Lumens
10.68 hrs
980 Lumens
1.24 hrs
790 Lumens
4.4 hrs
Battery Low Medium High
2550 Lumens
2.02 hrs
Turbo Strobe

PowerTac E9R-G4 Specifications

General

Brand	PowerTac
Model	E9R-G4
Category	Flashlight
Language	English

Summary

Introduction to Powertac E9R-G4

Powertac E9R-G4 Usage Instructions

Battery Installation

Instructions for installing the battery by unscrewing the tail cap and inserting the positive end.

Turning Light On and Off

Procedure to turn the flashlight ON or OFF by clicking the back switch.

Switching Light Levels

How to cycle through light levels by pressing the side switch.

Accessing Direct Strobe Function

Method to access the direct-to-strobe function by holding the side switch.

Toggling Strobe and High Modes

Procedure to toggle between strobe and high modes by repeated long presses of the side switch.

Powertac E9R-G4 Maintenance

Routine Thread Maintenance

Routine maintenance involves cleaning threads with a silicon-based lubricant every three months.

Powertac E9R-G4 Recharge Instructions

Magnetic Charging Procedure

Instructions for charging the flashlight using the magnetic charging cable.

Micro USB Charging Procedure

Steps to charge the flashlight via the exposed micro USB port.

Low Battery Indicator

Explanation of the LED indicator colors and patterns for low battery status.

Powertac E9R-G4 Features and Specifications

LED and Illumination

Details the use of the CREE XHP50 LED and its illumination throw distance.

User Interface and Modes

Highlights the intuitive user interface, side switch, and six distinct settings including brightness levels and strobe.

Durability and Construction

Specifies aircraft-grade aluminum, double-coated glass lens, tempered glass, and IPX8 waterproof standard.

Powertac E9R-G4 Safety and Disclaimers

Operational Safety Warnings

Cautions regarding hot surfaces, high-intensity light, and proper battery handling.

Product Use and Liability Disclaimers

Disclaimers on liability for improper use, modifications, and rights for design changes.

Battery Handling and Disposal Warnings

Warnings against recharging disposable batteries or throwing the flashlight into fire.

Powertac No-Hassle Lifetime Warranty

Warranty Disclaimer

Disclaimer of other warranties and limitations on liability for product use.

Warranty Claims Process

Instructions on how to submit a warranty claim through the Powertac website.