PowerTac Scholar - Features Specifications and Maintenance; Product Features and Specifications; Maintenance Guide; Important Disclaimers

2. Operation:
1. On / O : Short click the button on the side of the
head will activate the light. Short click again will
deactivate the light.
2. Stobe: When the light
is on ; long click the
side button. Repeat
will return light to
high setting.
When the light is o: Long click to activate stobe.
FEATURES & SPECIFICATIONS
• Personalized size conguration
• Uses one AAA Batteries
•Aluminum Version: Machined from aircraft grade
aluminum with type III anodized nish
• Stainless Steel Version: Elegant polished stainless steel
body.
• Constant current circuit design.
•Precision engineered optical lens produces focused and
proportioned light
• IPX6 waterproof rating; submersible to 2 meters
DISCLAIMER
• After long periods of use on the highest setting, the
surface area may get hot. Please use caution when
using the ashlight in a constant high brightness level.
It is recommended to let the ashlight cool down to
prevent any injury.
• High intensity light is harmful to human eyes. This
product is not meant to be handled by children under
the age of 18 without adult supervision.
• Use the highest quality, protected-circuit batteries to
insure maximum performance and safety. Consult
with the manufacturer regarding any questions or
concerns.
• PowerTac’s liability is voided if the light is not used in a
proper manner or if modied.
• PowerTac reserves the right to change the design
and/or specications of all PowerTac products without
prior notice.
• Please do not change batteries at dangerous locations
such as gas stations. Batteries must only be changed
or removed when light is o.
• Do not use or attempt to recharge a disposable CR123
battery! Do not throw the ashlight into a re as an
explosion may occur.
3. Remove used ink cartridge and replace with new ink.
4. Carefully tighten cartridge and re-assemble.
Maintenance
Every 3 months, threads should be wiped with a
clean cloth followed by a thin coating of
silicon-based lubricant.
Every Week you should check your battery to
ensure it is not leaking.
IMPORTANT
POWERTAC’S LIFETIME WARRANTY DOES NOT
COVER A BATTERY THAT HAS FAILED (LEAKED).
PLEASE BE SURE TO USE ONLY HIGH QUALITY
BRAND NAME BATTERIES TO ENSURE A LOWER
CHANCE OF BATTERY FAILURE
THE POWERTAC NO-HASSLE LIFETIME WARRANTY
Please visit our website at powertac.com for full
warranty policy.
WARRANTY DISCLAIMER
The above warranty is exclusive, and to the extent
permitted by applicable laws, shall be in lieu of all other
warranties, express or implied, including, without
limitation, any warranty of merchantability or tness for a
particular use or purpose. PowerTac disclaims any and all
liability for product malfunctions, physical injuries, or
property damages that result in whole, or in part, from
the criminal, negligent, or improper use of the product,
or from modications or alterations thereto. In no event
shall PowerTac be liable for any incidental, special, or
consequential damages relating to the purchase, use, or
performance of any PowerTac product.
WARRANTY CLAIMS
Please go to www.powertac.com/warranty and follow
instructions.
© 2017 POWERTAC USA, INC. ALL RIGHTS RESERVED
WWW.POWERTAC.COM