To Next PageTo Next Page
Need help?Do you have a question about the PowerTec BD4600 and is the answer not in the manual?
Guidelines for appropriate clothing and personal protective equipment.
Ensuring a clean, well-lit, and safe environment for tool operation.
Procedures for keeping the tool in optimal condition for safe use.
Best practices and warnings for safe and effective tool usage.
Checking contents and inspecting for shipping damage.
List of tools required for assembly and adjustment.
Instructions for positioning and securing the work table.
Steps to attach and adjust the work support.
Securing the sander to a workbench or stable surface.
How to align the sanding belt correctly on the pulleys.
Adjusting the sanding belt for horizontal or vertical use.
Connecting a dust collection system to the sander.
Ensuring the work table is perpendicular to the sanding disc.
Aligning the work support parallel to the sanding belt.
Instructions for safely removing and installing a new sanding disc.
Steps for changing the sanding belt and adjusting tension.
Wiring diagrams and connection requirements for the sander.
How to operate the keyed ON/OFF switch.
Techniques for flat sanding on the belt.
Methods for sanding curved surfaces on the belt.
Sanding small ends and outer curves using the disc.
Using the belt in both horizontal and vertical orientations.
Using the miter gauge for disc sanding operations.
Routine checks and cleaning for optimal performance.
Lubrication points for moving parts.
Procedure for adjusting the sanding belt tension.
Diagrams showing all parts of the sander with key numbers.
Details of the product warranty and satisfaction guarantee.
Instructions for requesting warranty repair or service.
Exclusions from the warranty coverage.
General