6. Features
1. 10 Selections of Disconnect Voltage
2. 10 Selections of Re-connect Voltage
3. MCU control with FET design resulting extremely low voltage drop & small
standby current.
4. Wide Operating Temperature Range : - 40°C to + 60°C
5. Extruded Aluminum housing sealed with Polycarbonate end caps
7. Protections
1. Instant disconnection when main terminal drops to 8.5V .
2. Over voltage protection at the main terminal.
3. Over temperature to the isolator >90°C case temperature
4. Over current to the unit .
5. Input reversed polarity protection to Main Terminal (self reset)
To Next Page
Loading...
Need help?
General