PowerTech PG 100 - User Manual

PG SERIES
Garagedeur openers
Handleiding

PowerTech PG 100 Specifications

General

Horsepower	1/2 HP
Security	Rolling code technology
Power	120V AC
Remote Controls	2
Warranty	1 year

Summary

Warnings

General Safety Precautions

Please read this instruction manual carefully before installation. Qualified personnel are advised.

Installation

3.1 Inventory of a Garage Door Opener

Rail Assembly

Rail Section Assembly

Chain and Pulley Installation

Steps for installing the slide block, metal chain, and adjusting chain tension with pulleys.

Attach the Rail to the Motor

Rail-to-Motor Connection and Fastening

Attach the Rail on the Header Wall and Ceiling

Header Bracket and Rail Mounting

Connect Release Section to the Garage Door

Emergency Release Rope Connection

Steps to connect the emergency release rope to the release trolley and secure the handle.

Disengage Trolley and Connect Straight Arm

Procedure to disengage the trolley and connect the straight door arm.

Connect Curved Door Arm to Door Bracket

Details on fastening the door bracket to the garage door and connecting the curved door arm.

Final Steps Before System Learning

Final Setup and Power Connection

Install blocker, attach warning sign, and connect power to the motor, ensuring safety.

Introduction of the Emergency Release

Manual Emergency Door Operation

Procedure for pulling the emergency release rope to manually operate the garage door.

System Learning, Reset Process, and LED Display

System Learning and Reset Procedures

Step-by-step guide for system learning and restoring default settings.

How to Set the Parameter

Parameter Setting Guide

Programmable Function Setting

Over Current Handling Configuration