Need help?Do you have a question about the PowerVision PowerEgg X and is the answer not in the manual?
General| Camera Sensor | 1/2.8 inch CMOS |
|---|---|
| Effective Pixels | 12 MP |
| Gimbal | 3-axis mechanical gimbal |
| Max Flight Time | 30 minutes |
| Aircraft Type | Quadcopter |
| Maximum Wind Resistance | Level 5 |
| Maximum Descent Speed | 3 m/s |
| Internal Storage | 6 GB |
| Max Video Bitrate | 75 Mbps |
| Video Format | MP4 (H.264/MPEG-4 AVC) |
| Stabilization | 3-axis (pitch, roll, yaw) |
| Maximum Control Speed | 120°/s |
| Intelligent Battery | Yes |
| Voltage | 11.4 V |
| Battery Type | LiPo 3S |
| Battery Capacity | 3800 mAh |
| Video Resolution | 4K |
| Max Transmission Distance | 6 km (FCC) |
| Waterproof | Yes (with waterproof accessory) |
| Maximum Ascent Speed | 4 m/s |
| Operating Frequency | 2.4 GHz |
| Transmitter Power (EIRP) | FCC: ≤26 dBm; CE: ≤20 dBm |
| GNSS | GPS+GLONASS |
| Hovering Accuracy Range | Vertical: ±0.5 m, Horizontal: ±1.5 m |
| Lens | FOV 78.4° |
| ISO Range | 100-3200 (video), 100-1600 (photo) |
| Image Size | 4000 x 3000 pixels |
| Video Recording Resolution | 4K: 3840 x 2160 at 30fps |
| Supported File Systems | FAT32/exFAT |
| Photo Format | JPEG |
| Controllable Range | Pitch: -90° to 0° |
| Operating Temperature | 0°C to 40°C |
| Waterproof Rating | IPX6 (with waterproof accessory) |
| Max Speed | 65 km/h (Sport Mode) |
Recommendations for initial setup and safety review before the first flight.
Instructions on downloading and installing the required mobile application.
Overview of the PowerEgg X's capabilities as an AI camera and drone.
Detailed information on the smart battery's functions, charging, and indicators.
Steps for creating a user account via email or phone number in the app.
Procedure for activating the PowerEgg X through the Vision+ 2 App.
Guide on how to update the drone and remote controller firmware via the app.
Steps for physically setting up the AI camera, including installing accessories.
Overview of the Vision+ 2 App interface and its key features for camera control.
Explains photo, video, slow motion, and time-lapse shooting capabilities.
How to use the AI camera to detect, recognize, and follow subjects.
Using hand gestures and configuring gimbal modes for camera control.
Instructions on how to share live video broadcasts from the drone.
Instructions for preparing and assembling the drone and its components.
Steps to prepare the remote controller, including unfolding antennas and connecting mobile devices.
Covers powering, charging, and basic control functions of the remote controller.
Explains stick controls, flight modes, and Return-to-Home (RTH) functionality.
Procedure for linking the remote controller to the drone.
Explains the meaning of various LED indicators for drone status and warnings.
Guidelines for attaching, replacing, and safely handling propellers.
Details on how vision systems aid navigation and obstacle detection.
Description of P, N, E flight modes and their characteristics.
Explains different RTH scenarios like Smart, Low Battery, and Failsafe.
Details on precise landing and landing protection features.
Explains Smart Following, Point of Interest, and QuickShot automated flight paths.
Comprehensive safety rules, environmental requirements, and warnings.
Step-by-step checklist before each flight to ensure readiness.
Procedures for automatic takeoff/landing, arming/disarming motors.
Using waterproof accessories, flying in rain/on water, and case installation.
Steps and software requirements for calibrating the drone's vision system.
Instructions on when and how to perform compass calibration for accurate navigation.
To Next Page
