Need help?Do you have a question about the PowerVision PowerRay and is the answer not in the manual?
General| Category | Underwater Drone |
|---|---|
| Camera | 4K UHD |
| Max Depth | 30 meters |
| Battery Life | 4 hours |
| Sonar | Yes |
| Weight | 3.8 kg |
| Operating Time | 4 hours |
| Photo Resolution | 12 MP |
| Video Resolution | 4K UHD |
| FOV | 95 degrees |
| ISO Range | 100-3200 |
| Live Streaming | Yes |
| Connectivity | Wi-Fi |
| LED Lights | Yes |
| Sensor | 1/2.3 inch CMOS |
| Internal Storage | 64 GB |
| Dimensions | 465 x 270 x 126 mm |
| Control Range | 80 meters |
| Max Speed | 3-4 knots (1.5-2 m/s) |
| Speed | 3-4 knots (1.5-2 m/s) |
Details key features such as maximum depth, speed, camera resolution, and accessory compatibility like Fish Finder and VR goggles.
Step-by-step guide on preparing the PowerRay for operation, including opening covers and installing accessories like the Fish Finder.
Crucial steps for unlocking and locking the propellers to safely control the PowerRay via joystick.
Explains the four available joystick control modes and how to select them through the app.
Details how to adjust the PowerRay's speed using the gear shift button on the remote controller.
Describes the three speed gears (L, M, H) and their respective speeds for the PowerRay's propulsion system.
Steps to connect the mobile device to the PowerRay's Wi-Fi hotspot and log into the Vision+ application.
Explains how to access and use the motion control settings within the Vision+ app for navigation.
To Next Page
