Need help?Do you have a question about the Powerwerks PW100T and is the answer not in the manual?
General| Type | Portable PA System |
|---|---|
| Power Output | 100W |
| LF Driver Size | 10 inches |
| Frequency Response | 60 Hz - 20 kHz |
| Inputs | XLR, RCA |
| Outputs | XLR |
| Power Source | AC |
| HF Driver Size | 1 inch |
Read and follow all safety and operating instructions before using this product.
Lire et suivre toutes les recommandations et précautions d'emploi avant d'utiliser ce produit.
XLR inputs for low-impedance mics or mic-level outputs; receive 15V phantom power.
¼-inch inputs for high-impedance mics, keyboards, drum machines.
Stereo input for external audio devices; channels summed to mono.
Controls channel volume and relative balance between channels.
Adjusts low frequencies for deeper, warmer tone when turned clockwise.
Accents high frequencies for clearer sound when turned clockwise.
Controls overall volume of all channels and input on POWERLINK.
XLR input for linking another PW100T; sums channels.
XLR output for linking PW100T or connecting to a power amp.
Line level output for subwoofers; activates crossover at 150Hz.
Switch to activate AC power to the unit.
Connects the AC power cord; can be removed for storage.
To Next Page