PowerXL BOOST BLENDER PLUS - Parts & Accessories; Instructions for Use; Before First Use; Blender Jar Assembly

PowerXL
™
Boost Blender Plus
™
7
Parts & Accessories
1. Dual-Opening Lid
2. PerfectPour
™
Spout
3. Ingredient Slot
4. Blending Jar
5. Handle
6. Jar Base/
Blade Assembly
7. Base
8. Off Button
9. Speed Buttons
10. Pulse Buttons
1
4
5
7
6
8
3
2
9
10
Instructions for Use
Before First Use
Blender Jar Assembly
• Remove all packing material, any
stickers from the product, and the
plastic band around the plug.
• Remove and save literature.
• Wash all removable parts as
instructed in the “Cleaning &
Storage” section of this manual.
1. Turn the blending jar upside
down and place it at on a
counter top or work surface.
CAUTION: The blades are sharp.
Handle carefully.
2. Place the jar base/blade
assembly onto the jar and rotate
clockwise until it is tight.
3. Turn the assembled jar right
sideup.
4. Place the lid on the blending jar.
NOTE: Make sure the ingredient
slot is closed.
5. Unwrap the power cord from the
storage area under the base.
6. Place the jar assembly on the
base and turn clockwise to lock
into place. The marks on the jar
assembly will align with the marks
on the top edge of the base.
7. The blender is now ready for use.