PowerXL VORTEX PRO AF-E4001-LA - Instructions for Use; Before First Use; Inserting the Fry Tray

38
Instructions for Use
1. Read all material, warning stickers, and labels.
2. Remove all packing materials, stickers, and
labels from the appliance.
3. Before initial use, wipe the inside and outside
of the appliance with a warm, moist cloth
and mild detergent. Handwash all cooking
accessories.
4. Place appliance on a heat-resistant surface
or use heat protection. Do not place the
appliance on a surface that is not heat
resistant. Ensure that the appliance is used
in an area with adequate air circulation. Do
not place on the stove top.
5. Before cooking food, preheat the appliance
for a few minutes to allow the appliance to
burn off the manufacturer’s protective coating
of oil. Wipe the appliance with warm, soapy
water and a dishcloth after this burn-in cycle.
Inserting the Fry Tray
1. Place the Fry Tray in the Basket. The Fry Tray’s
adjustable tray height lets you place food
closer to the heating element for broiling.
You can also use it to make the total size of
the basket smaller when cooking smaller
quantities of food.
2. To raise the Fry Tray closer to the heating
element, position the edges of the Fry Tray
(see Fig. i) on the Fry Tray Holders (see Fig. j).
To use the Fry Tray on the bottom of the Basket, rotate the FryTray so that the Fry Tray‘s
edges slide past the Fry Tray Holder, and push the Fry Tray to the bottom of theBasket
(see Fig k).
3. Slide the Basket into the appliance. If the Basket is placed properly, it will click into
place.
NOTE: This appliance cooks using hot air. Do not ll the Basket with oil or frying fat.
Before First Use
Fig. i
Fig. j
Fig. k
AF-E6001-LA_29513_IB_SE_B.indd 38AF-E6001-LA_29513_IB_SE_B.indd 38 10/19/22 1:49 PM10/19/22 1:49 PM