Need help?Do you have a question about the POWERZONE Crunch PZI 1500.1 and is the answer not in the manual?
Planning the system, considering headroom, component quality, and potential noise sources.
Guidance on mounting, wiring, grounding, and connection sequence for optimal performance.
Overview of features, crossover functions, and input/output for 2-channel models.
Features, crossover functions, and input/output for 4-channel models.
Features, crossover functions, and input/output for mono block and D-class mono amplifiers.
Demonstrates stereo, mono, and bi-amplified system setups using 2-channel amps.
Covers full range, bridged, and bi-amplified system configurations for 4-channel amps.
Illustrates basic applications for mono sub bass amplifiers.
Details full range system configurations for 5-channel amps.
Adjusting high pass, low pass, bass EQ, and level controls for multi-channel amps.
Configuring subsonic, bass EQ, low pass, phase, and level for mono amplifiers.
Diagnosing protect mode, DC offset, overheating, and power issues.
Identifying and resolving hiss, electrical interference, and engine-related noises.
Explains warranty coverage, limitations, and return procedures for products.
General| Channels | 1 |
|---|---|
| RMS Power at 4 Ohms | 500W |
| RMS Power at 2 Ohms | 1000W |
| RMS Power at 1 Ohm | 1500W |
| Power Output (Peak) | 3000W |
| Signal-to-noise ratio | >90dB |
| THD | <1% |
| Input Sensitivity | 200mV - 6V |
| Subsonic Filter | 10Hz - 50Hz |
| Bass Boost | 0dB - 12dB |
| Fuse Rating | 150A |
To Next Page
