EasyManua.ls Logo

POWR RACK11 User Manual

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
POWR%RACK11%IM%v1%
1"
POWR RACK11
Rack Mounted Power Conditioner
Instruction Manual
"
"
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions. All the safety and operating instructions should be read before the product is operated.
2. Keep these instructions. The safety and operating instructions should be retained for future reference.
3. Heed all warnings. All warnings on the product and in the operating instructions should be adhered to.
4. Follow all instructions. All operating and use instructions should be followed.
5. Do not use this apparatus near water. Do not use the product near water and moisture, for example: near a bathtub, washbowl,
kitchen sink, or laundry tub; in a wet basement; or near a swimming pool.
6. Clean only with a dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a dry cloth for cleaning.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that product
heat.
8. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for long periods of time.
12. Refer all servicing to qualified service personnel. Servicing is required when the!apparatus has been damaged in any way, such as
power-supply cord or plug is!damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
!
INSTALLATION
Attach the POWR RACK11 to any 19-inch rack using rack rail screws (not included).
!
!
!
SPECIFICATIONS!
19-inch rack mount surge protector
Peak impulse current 120,000A
Digital amperage/voltage meter
Transient response time <1 nanosecond
Pull out dimmable LED lights
Energy dissipation 3,000 Joules
11 (10 rear, 1 front) NEMA-15R receptacles
EMI/RFI noise filtration 40 dB
On/off switch with built-in circuit breaker
Noise filtration level 100kHz 1MHz
LED Indicators - Power, Protected, Grounded
9-foot heavy-duty power cord
Current capacity 12A
Dimensions 19.0” x 4.5” x 1.75”
Maximum output power 1,500W
Weight 5.25 pounds
Line voltage 125V AC 60Hz
UL, cUL listed (UL60950-1, UL1449)
Question and Answer IconNeed help?

Do you have a question about the POWR RACK11 and is the answer not in the manual?

POWR RACK11 Specifications

General IconGeneral
BrandPOWR
ModelRACK11
CategorySurge Protector
LanguageEnglish

Summary

Important Safety Instructions

General Safety Precautions

Read, keep, heed, and follow all instructions and warnings. Do not use near water or in wet conditions.

Cleaning and Ventilation

Clean only with a dry cloth. Do not install near heat sources. Ensure proper ventilation.

Electrical Safety

Do not defeat plug safety features. Protect power cords and use specified accessories. Unplug during storms.

Servicing Requirements

Refer all servicing to qualified personnel. Service is required if damaged or not operating normally.

Installation Guide

Rack Mounting

Attach the POWR RACK11 to any 19-inch rack using rack rail screws (not included).

Product Specifications

Key Features

19-inch rack mount surge protector with digital meter, dimmable LED lights, circuit breaker, 11 NEMA-15R receptacles.

Performance Metrics

Peak impulse current 120,000A, transient response <1 nanosecond, 3,000 Joules dissipation, 40 dB EMI/RFI noise filtration.

Electrical Ratings

Current capacity 12A, max output 1,500W, line voltage 125V AC 60Hz.

Physical Characteristics

9-foot heavy-duty cord, dimensions 19.0"x4.5"x1.75", weight 5.25 lbs, UL/CUL listed.

Warranty Information

US Resident Warranty

5-year warranty against defects for US residents. Repair/replace at discretion. Follow care instructions.

Warranty Exclusions

POWR BRAND disclaims liability for modifications, improper installation, or failure to follow care instructions.

Legal Rights and Limitations

Warranty grants specific legal rights. Disclaims other warranties and damages. Specifications subject to change.