PR electronics 3000 - Temperature Range Programming

To Next Page

To Previous Page

3000V103-UK 19

Temperature range programming

Please note:

• 3101 and 3111 - only TC input available

Valid TC J range: -100...+1200°C = correct DIP-switch setting

Valid TC K range: -180...+1372°C = correct DIP-switch setting

• 3102, 3112 and 3333 - only Pt100 input available

Valid Pt100 range: -200...+850°C = correct DIP-switch setting

• ”Start temp” must be lower than ”End temp” = correct DIP-switch setting

• Power must be cycled after DIP-switch positions are changed

Other manuals for PR electronics 3000