DMX connector(female) 1 Pc
XLR connector(male) 1 Pc
2/34
INDEX
1.
SAFETY AND WARNINGS
2.
INSTUCTIONS
●
CLEANING AND MAINTENANCE
●
LUBRICATION
●
TROUBLESHOOTING
3. APPEARANCE
4. INSTALLATION
●
RIGGING
●
POWER CONNECTIONS
●
DMX CONTROL CONNECTIONs
●
DMX TERMINATOR
●
ALIGNMENT/INSTALLATION/REPLACEMENT OF A LAMP
●
GOBO REPLACEMENT
5. SETUP AND CONFIGURATION
●
FRONT PANEL OPERATION
●
DMX START ADDRESS
●
DMX WIRELSESS CONTROL
●
STAND-ALONE MODE
●
MASTER/SLAVE MODE
6.OPERATION MENU
7. DMX PROTOCOL
8. LED INDICATION
9.
ERROR MESSAGES
10.
TECHNICAL DATA
11.CIRCUIT DIAGRAM AND PCB CONNECTIONS
●
CIRCUIT DIAGRAM
●
PCB CONNECTIONS
12.COMPONENT ORDER CODES
3
4
4
4
4
5
5
5
6
7
7
8
9
10
10
10
10
10
10
11
16
24
24
25
31
31
32
33
ACCESSORIES
The following items are supplied with the projector and please check:
Name Quantity Unit Remark
G clamps 2 Pcs
Safety cord 1 Pc
User manual 1 Pc
Ω clamps 2 Pcs Optional
Please note that as part of our ongoing commitment to continuous product development, specifications are subject to change without notice. Whilst
every care is taken in the preparation of the manual we reserve the right to change specifications in the course of product improvement. The
publishers cannot be held responsible for the accuracy of the information herein, or any consequence arising from them.
Every unit is tested completely and packed properly by the manufacturer. Please make sure the packing and / or the unit are in good condition
before installation and use. Should there be any damage caused by transportation, consult your dealer and do not use the unit. Any damage caused
by improper use will not be assumed by the manufacturer and / or dealer.
To Next Page
Loading...
Need help?
General
