To Next PageTo Next Page
Need help?Do you have a question about the PR Lighting XR440 BWS and is the answer not in the manual?
General| Type | Moving Head |
|---|---|
| Light Source | LED |
| Colors | RGBW |
| Frost | Yes |
| Dimmer | 0-100% |
| Pan | 540° |
| Tilt | 270° |
| Input Voltage | AC100-240V, 50/60Hz |
| Control Protocol | DMX512, RDM |
| Control | DMX512 |
| Effects | Color Mixing |
Comprehensive safety guidelines for projector installation, operation, and maintenance.
Procedures for cleaning, maintaining, and lubricating projector components.
Lists common problems with projectors and their corresponding solutions.
Identifies projector structure, rear panel, and front panel components.
Instructions for safely rigging and securing the projector for installation.
Guides on correctly connecting the projector to the power supply with safety notes.
Connecting DMX controllers and using a DMX terminator.
Step-by-step guide for installing and aligning the projector lamp.
Instructions on how to replace gobos within the projector.
Navigating and operating the projector using front panel buttons and LCD.
Setting DMX start address and configuring wireless DMX.
How to operate the projector without a DMX controller.
Configuring projectors to operate synchronously as master or slave units.
Setting DMX address, mode, and resetting projector configurations.
Controlling lamp and defining behavior when DMX signal is lost.
Managing factory defaults, lock options, and general settings.
Configuring various operational options like color, gobo, and dimming.
Customizing display settings such as mode, invert, dimming, and contrast.
Viewing technical info and accessing diagnostic test modes.
Manual control of lamp and configuration of wireless DMX.
Selecting operation modes and saving custom user scenes.
DMX channels for strobe, dimming, and Cyan-Magenta-Yellow color mixing.
DMX control for color wheel selection and fixed gobo wheel functions.
DMX control for rotating gobos, prisms, and frost effects.
DMX control for focus, zoom, and pan/tilt head movements.
DMX control for pan/tilt speeds and general control functions.
DMX channels for shutter, macro, and dimming functions.
DMX control for advanced CMY color mixing and effects.
Indication of DMX signal status and wireless connection.
Lists potential error codes and their corresponding troubleshooting steps.
Input voltage, power consumption, and lamp details.
Information on color wheel colors, code numbers, and wavelengths.
Specifications for fixed and rotating gobo wheels, including gobo types.
Details on prisms, diffusers, and beam angle specifications.
Details on control interfaces, housing, weight, and operating temperature.
Graphical representation and numerical values of the projector's physical dimensions.
Lux levels and beam diameter at various distances for different modes.
A schematic showing the internal electrical connections and components.
Pinout and connection diagrams for various PCB boards within the projector.
Part numbers for motors, fans, accessories, and electronic boards.
Part numbers for belts and other miscellaneous replacement parts.
