To Next Page

To Previous Page

14 5725V102-UK

! Error indications in the display blink once a second. The help text explains the error.

Display out of range Indication

Valid display value range: Out of range limit Display readout

-1999 to 9999

< -1999 ”-1.9.9.9.” - flashing

> 9999 ”9.9.9.9.” - flashing

Hardware error indication

Error explanation Error cause Display readout

Error in internal communication

(SPI etc.)

Permanent error in intercommu-

nication between microcon-

trollers

”HW.ER” - flashing

Error in checksum test of the con-

figuration in RAM

Error in RAM ”RA.ER”- flashing

Error in checksum test of the con-

figuration in EEPROM

Error in EEPROM ”EE.ER”- flashing

Error in OK check or checksum

test of the calibration data in

FLASH

Error in FLASH or

Calibration has not been per-

formed or Calibration data in

FLASH are corrupt

”NO.CA”- flashing

Other manuals for PR 5725

Questions and Answers:

Need help?

Do you have a question about the PR 5725 and is the answer not in the manual?

General