Praim Neutrino Thin Client Series User Manual

EN - Neutrino Dual Core
Neutrino Thin Client Series
Model Linux based Terminal - link to the User Guide N9052 ThinOX User Guide
Model Windows Embedded Standard 7 based Terminal - link to the User Guide N9072 Windows
Embedded 7 User Guide
Model Windows Embedded 10 IoT Terminal - link to the User Guide N9012 Windows 10 IoT User
Guide
Neutrino Zero Client Series
Modello PXE Boot TerminalN1002
Modello Linux based Terminal Citrix HDX - link to the User Guide N90-HDX ThinOX User Guide
Modello Linux based Terminal Microsoft RDP/RFX - link to the User Guide N90-RFX ThinOX User
Guide
Modello Linux based Terminal VMware Horizon - link to the User Guide N90-HOR ThinOX User
Guide
Unpacking the Terminal
Remove the terminal and all accessories from the packing carton.
Make sure you have the following components:
Installation Guide (this document)
Terminal logic unit
Stand foot for vertical installation
Screw for USB door + screw for stand foot
External power supply with power cord
DVI-I to VGA adapter
Optical mouse
Equipment Warranty Card
Safety instructions sheet
If you need help during installation, or if any items are missing or damaged, contact immediately your supplier.
Safety Notes
Do not expose the terminal, line cord, or monitor to rain or moisture. Do not place the terminal in direct sunlight, near heat sources or air
conditioners, or in dusty or dirty environments. Install the terminal as shown in this guide, do not allow anything to close in the ventilation
holes.
Warning - To prevent damages during the installation, make sure that the terminal is NOT connected to the electrical outlet and that the
display monitor is NOT powered on.
IMPORTANT - ThinMan administration software, utility tools and products
updates.
On the Praim WEB site are available all the products information on ThinMan: www.praim.com
The ThinMan User Guide is available at this link: https://wiki.praim.com/display/ThinMan/
We recommend the use of a pad for the mouse to work correctly.

Praim Neutrino Thin Client Series Specifications

General

Brand	Praim
Model	Neutrino Thin Client Series
Category	Desktop
Language	English

Summary

Neutrino Thin Client Series

N9052 Linux Terminal

Linux based terminal model N9052, with link to its User Guide.

N9072 Windows Embedded Standard 7 Terminal

Windows Embedded Standard 7 based terminal model N9072, with link to its User Guide.

N9012 Windows Embedded 10 IoT Terminal

Windows Embedded 10 IoT terminal model N9012, with link to its User Guide.

Neutrino Zero Client Series

N1002 PXE Boot Terminal

PXE boot terminal model N1002.

N90-HDX Linux Terminal (Citrix HDX)

Linux based terminal N90-HDX for Citrix HDX, with link to its User Guide.

N90-RFX Linux Terminal (Microsoft RDP/RFX)

Linux based terminal N90-RFX for Microsoft RDP/RFX, with link to its User Guide.

N90-HOR Linux Terminal (VMware Horizon)

Linux based terminal N90-HOR for VMware Horizon, with link to its User Guide.

Unpacking and Safety

Unpacking the Terminal

Lists all components that should be present in the terminal's packing carton.

Safety Notes

Provides crucial safety advice regarding terminal placement, environmental conditions, and electrical connections.

Terminal Installation

Vertical Installation

Details on installing the logic unit vertically using the provided stand foot for stability.

VESA Bracket Mounting

Information on mounting the logic unit to an LCD monitor using a VESA bracket kit.

Connecting Cables and Peripherals

Monitor Connection (VGA or DVI)

Instructions for connecting monitors to the DVI-I and DVI-D ports, including using a DVI-VGA adapter.

LAN Cable Connection

Guidance on connecting the RJ45 Ethernet cable to the terminal's LAN port for network connectivity.

USB Peripherals Connection

Details on connecting USB devices to front and rear ports, noting USB 3.0 is blue.

Powering and Positioning

External Power Adapter Connection

Instructions for connecting the external power supply to the terminal and a wall outlet.

Powering ON the Terminal

Steps for powering on the terminal, indicating the power button status light and initial startup sequence.

Unit Positioning

Specifies that the unit should be placed vertically, except when mounted on a monitor.

Compliance and Settings

Declaration of Conformity

States compliance with EC Council directives and harmonic rules, including CE and FCC certifications.

FCC Rules

Details FCC regulations for Class B digital devices, including measures to correct radio frequency interference.

Power Management Settings

Configures display and thin client sleep modes, and options for resuming from sleep.