EasyManua.ls Logo

Pramac P Series - Basic Troubleshooting Guide

Pramac P Series
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9 Basic troubleshooting
40
9. Basic troubleshooting
Problem / symptom
Cause / remedy
Check the following if the engine does
not start:
▪ Engine switch is in the "Start" position.
▪ Fuel cock is open.
▪ Fuel is replenished.
▪ Choke lever is in the correct position. The choke should
be closed when starting a cold engine.
▪ No electric equipment is connected to the generator.
▪ Spark plug is in good condition.
▪ Spark plug cap is firmly seated.
▪ Engine oil level is sufficient.
Check the following if the engine
starts, but the generator does not
deliver any power to plug receptacles:
▪ Fuse switch is closed.
▪ Wiring from the generator to the plug receptacles is
secured.
Check the following if the engine
starts, but runs irregularly:
▪ Air cleaner condition.
▪ Condition of the spark plug and spark plug cap.
▪ How new the fuel is.