955205_01 11/11 5
System Overview
Flow Meter
727305 & 727306
The Flow Meter measures the rate at which the
liquid is owing through the system and is used to
indicate the applicaon rate of the product. The
Flow Meter should be installed vercally inline
between the liquid pump and distribuon. This
placement ensures that the rate indicated to the
user is for that of the enre system. The sensor on
the Flow Meter will be connected to the Flow
Meter Harness. There are two Flow Meters
available. The Standard Flow (727306) is for rates
of 2 – 40 gpm, and the Low Flow (727305) for rates
of .5 – 12 gpm. The Low Flow meter is
disnguished with a red zip e aached.
Flow Meter Harness
727303
The Flow Meter Harness connects the Flow
Meter’s sensor (3-pin Metripack) to the RowFlow
system through the Row Unit Module’s (RUM)
auxiliary port (6-pin Deutsch).
To Next Page
Loading...
