Precision Products TCT15

To Next Page

Fig. 3

3/4” Flat Washer

Cotter Pin

Axle Slot

Fig. 1

Ref.

No.

Part

No.

1 1840 1/2”x 1-3/4” Clevis Pin

2 1248 5/16” x 3/4” Hex Head Bolt

3 1042 #14 Hitch Pin Clip

4 1044 5/16” Flat Washer

5 1276 5/16” Lock Washer

6 1275 5/16” Hex Head Nut

7 3739 3/4” In Diam. x 2” Flat Washer

8 1264 3/4” Flat Washer

9 1262 1/8” x 1-1/4” Cotter Pin

Part Description

Hardware

Sack Qty.

Trailer Sprayer

ASSEMBLY INSTRUCTIONS & PARTS LIST

03/05

PRECISION PRODUCTS, INC.

3736-6

Assembly Hardware

Assembly Instructions

Cart Body Assembly Parts

LIMITED WARRANTY

This unit is warranted against defects in materials and workmanship to the original

purchaser, under normal use and service, for a period of ninety (90) days from date

of sale. During the Warranty Period, we will repair or replace at our option free of

charge to the original purchaser, any part of the Unit that our examination shows to

be defective in workmanship or materials. This Warranty apply to damage

caused by misuse, abuse, neglect, accident, normal wear, or alterations by

unauthorized persons.

Does Not

The electric pump on this model has its own warranty. Precision Products, Inc. does not carry

a warranty on the pump. Please refer to the parts list and operation manual for the pump

included with this model.

PRECISION PRODUCTS, INC.

Fig.3

Tools needed for assembly:

Two 1/2” Wrenches

1 Pair Needle Nose Pliers

Fig. 2

3/4” Diameter x 2”

Flat Washers

Axle

1/2”x 1-3/4” Clevis Pin

5/16” x 3/4” Hex Head Bolt

#14 Hitch Pin Clip

5/16” Flat Washer

5/16” Lock Washer

5/16” Hex Head Nut

3/4” Diameter x 2” Flat Washer

3/4” Flat Washer

1/8” x 1-1/4” Cotter Pin

5/16” x 1/2” Hex Head Bolt

5/16” Lock

Washers

Fig. 4

5/16” x 1” Hex

Head Bolts

5/16” Flat

Washers

Clevis

5/16” Hex

Head Nuts

STEP 1 Insert Axle through Axle Slot on Cart Body

. Once the Axle is through the hole, slide on one 3/4” x 2” Flat W

asher(7) then the

Axle Tube Spacer(44), then slide the Axle through to the end of the Axle T

ube Spacer. Add another 3/4” x 2” Flat W

asher (inside

of the Sprayer Cart body) and push the Axle through the other hole on the Cart Body

. Once the Axle is through the second hole,

slide on a 3/4” ID x 2” Flat W

asher(7), (Fig.2). Now slide on a wheel followed by a 3/4” Flat W

asher(8) and then secure with

a Cotter Pin(9). Repeat this for both Wheels. Use Needle Nose Pliers to bend back ends of the Cotter Pin,(Fig.3). R

epeat for

other side. Using 5/16” x 3/4” Hex Head Bolts(2), 5/16” Flat W

ashers(4), 5/16” Lock Washers(5), and 5/16” Hex Head Nuts(6)

attach Clevis, (42),(on topside of Cart Body) to the Cart Body (Fig. 4). Tighten Bolts with 1/2” wrenches. Insert Clevis Pin(1)

through Clevis and secure with #14 Hitch Pin Clip(3) underneath Cart Body

Ref.

Part Description Part Number

Qty.

1840

1248

1042

1044

1276

1275

3739

1264

1262

1249

Ref.

Part Description Part Number

Qty.

Clevis

Axle

Axle Tube Spacer

10” Pneumatic Wheel for TCT

TCT Cart Body

Boom Mount

1243P

3769

3767

3768

3740R

3766R

**Part quantities includes pieces assembled at factory

and those in hardware sack.

TCT15

TCT15RT

Cart Body

3/4” Diameter x 2”

Flat Washers

Axle Spacer

When ordering parts, always give model number,

part description, & part number.

Precision Products, Inc.

Parts Division (217)735-1590

316 Limit Street (217)735-2435

Lincoln, IL 62656

or visit us on the world wide web :www.precisionprodinc.com

Send To:

Phone

Fax

Customer Service

CUSTOMER SUPPORT

At Precision Products, Inc. delivering quality, value and outstanding service is our goal.

However, sometimes parts do become damaged or lost during transport from our facilities to

the store. If you have any problems, please do not return this merchandise to the store.

Call us and we will take care of any problem you may have with this unit.

Need help?

Do you have a question about the Precision Products TCT15 and is the answer not in the manual?

Summary

Assembly Instructions

STEP I: Attaching Axle and Wheels

Instructions for assembling the axle, wheels, and clevis to the cart body.

Assembly and Operation Guide

STEP 2: Attaching Boom Mount

Attaching the boom mount and boom arm assembly to the cart body.

Introduction to Sprayer Use

Overview of sprayer features, operation, and maintenance importance.

Sprayer Operation

Guidelines for operating the sprayer, including pre-use water fill.

Sprayer Maintenance and Care

Essential maintenance, cleaning, and storage procedures for longevity.

Parts List

Pump Assembly Parts

List of parts and corresponding numbers for the pump assembly.

Cart Body Assembly Parts

List of parts and corresponding numbers for the cart body assembly.

Customer Support and Warranty

Customer Service Information

Contact details and procedures for parts ordering and issue resolution.

Limited Warranty Details

Information on warranty coverage, period, and exclusions for the unit.

The TCT15 / TCT15RT Trailer Sprayer is a robust and efficient device designed for various spraying applications, offering dependable and long-lasting service. Manufactured by Precision Products, Inc., this sprayer is built to provide maximum efficiency and ease of use, making it suitable for both residential and commercial tasks.

Function Description:

The primary function of the TCT15 / TCT15RT Trailer Sprayer is to apply liquids, such as herbicides, insecticides, fertilizers, or other chemicals, over a designated area. It is designed to be towed, making it ideal for larger properties or areas that require mobile application. The sprayer features a pump assembly that draws liquid from a tank and delivers it through a boom arm assembly or a spray wand, allowing for precise and controlled distribution. The electric pump, a critical component, ensures consistent pressure and flow for effective spraying.

Important Technical Specifications:

Power Source: The sprayer operates on a 12-volt direct current (DC) source, typically connected via a cigarette lighter plug or directly to a 12V battery. This ensures portability and compatibility with various vehicles.
Tank Capacity: It is equipped with a 15-gallon sprayer tank (Part No. 3614), providing ample capacity for extended spraying sessions without frequent refills.
Pump: The electric pump models include TCT15-12V (1.0 W/O Switch) (Part No. 3655) and TCT15RT-12V (1.0 W/ Switch) (Part No. 3656). These pumps are designed for efficient liquid transfer and consistent pressure.
Nozzles: The sprayer utilizes Nozzle 2.5 Brown (Part No. 3719) and includes a Suction Strainer (Part No. 3619) for preventing clogs. The boom assembly incorporates Nylon Nozzle Fittings (Part No. 39), which contain the strainers.
Hoses: Various hoses are used, including a 3/8" Rubber Hose (Part No. 3773) for the main line, a 1/2" Clear Hose (Part No. 3775) for the boom, and a 3/8" Rubber Hose 24" (Part No. 3777).
Wheels: The sprayer is equipped with 10" Pneumatic Wheels (Part No. 3768), providing smooth mobility over various terrains.
Assembly Hardware: The unit uses a range of fasteners, including 5/16" x 3/4" Hex Head Bolts (Part No. 1248), 5/16" Flat Washers (Part No. 1044), 5/16" Lock Washers (Part No. 1276), and 5/16" Hex Head Nuts (Part No. 1275), ensuring secure and durable construction.
Dimensions (Approximate based on components): The overall design includes a cart body (Part No. 3740R) with an axle (Part No. 3769) and boom mount (Part No. 3766R), indicating a compact yet functional trailer design.

Usage Features:

Ease of Assembly: The manual provides clear, step-by-step instructions for assembly, including detailed diagrams and a list of hardware. Key steps involve attaching the axle to the cart body, securing the wheels, and mounting the boom assembly. Tools required are two 1/2" wrenches and a pair of needle-nose pliers.
Mobile Application: Being a trailer sprayer, it offers excellent mobility, allowing users to cover large areas efficiently by towing it with a suitable vehicle.
Versatile Spraying: The inclusion of a spray wand (Part No. 3611) alongside the boom assembly provides flexibility for both broad area coverage and spot treatment.
Pre-Spraying Familiarization: The manual recommends filling the tank with plain water before using chemicals. This allows users to familiarize themselves with the sprayer's operation and prevent the waste of expensive chemicals.
Safety Guidelines: Users are advised to connect the red wire to the positive (+) source and the black wire to the negative (-) source for proper electrical operation.

Maintenance Features:

Thorough Cleaning: The most critical aspect of maintenance is immediate and thorough cleaning after each use, especially when using corrosive spray materials. This prevents residue buildup and ensures the longevity of the sprayer.
Neutralizing Agents: The manual suggests using neutralizing agents like Nutra-Sol, detergent, or household ammonia, as recommended by chemical manufacturers, to assist in removing persistent chemicals.
Flushing Procedure: The recommended cleaning method involves pumping several rinses of clean water through the tank, pump, hoses, boom, and spray gun. This ensures all components are free of chemical residue.
Nozzle Care: Users are explicitly warned against using metal objects to open clogged nozzles, as this can damage them.
Winter Storage: For storage at the end of the spraying season, adding permanent type anti-freeze to the final rinse is recommended. This leaves a rust-inhibiting film in the sprayer's parts, protecting them from corrosion.
Regular Inspection: The manual emphasizes the importance of studying the operation and maintenance instructions carefully to ensure long satisfactory service and to identify any potential issues promptly.
Parts Service: Users are encouraged to keep the manual for future reference and to mention the model and part number when ordering replacement parts, ensuring correct service.

The TCT15 / TCT15RT Trailer Sprayer is designed for durability and ease of maintenance, ensuring many years of reliable service when properly cared for. Its robust construction and thoughtful design make it an indispensable tool for effective liquid application.