Precision ULTRA 900 - User Manual

Homeowner’s Manual
• Please read this manual and included safety information carefully.
• After the opener is installed and working properly, use your smart phone
to download and activate the Linear Smart Garage Door app (page 11).
Important Safety Information ............................... page 1
Using the Garage Door Operator ........................ page 2
Manual Disconnect .............................................. page 3
Testing the Safety Beam ..................................... page 4
Adjusting the Open and Close Limits .................. page 5
Automatic Door Force Setup ............................... page 6
Safety Reversal System Test ............................... page 6
Programming Remote Controls ........................... page 7
Programming Keypad Codes .............................. page 8
Setting Up the Wall Station ................................. page 9
Maintenance ...................................................... page 11
Installing/Replacing the Battery Back-Up .......... page 12
Troubleshooting ................................................. page 13
Warranty ............................................................ page 14
Installer’s Contact Information:
To reduce the risk of injury to persons – Use this
opener only with sectional residential overhead doors.
Do not use on one piece or swing doors.
WARNING
Smart Wi-Fi Garage Door Opener
DC motor with LED lighting and belt or chain-drive rail
Battery Back-Up Capable (Ultra 900)
Battery Back-Up Included (Ultra 900B)
ULTRA 900 / 900B
Copyright © 2019 Nortek Security & Control, LLC 10019144 B
Manufactured by:
Nortek Security & Control LLC
USA & Canada (800) 421-1587 & (800) 392-0123
www.nortekcontrol.com

Summary

Important Safety Information

Important Safety Instructions

Key safety steps to prevent injury or death during installation and operation.

Using the Garage Door Operator

Opening the Door

Closing the Door

Manual Disconnect

Testing the Safety Beam

Safety Beam Test

Steps to test the safety beam alignment and functionality for safe operation.

Adjusting the Open and Close Limits

Adjusting the Open Limit

Procedure to set the door's maximum open position correctly.

Adjusting the Close Limit

Procedure to set the door's maximum closed position correctly.

Automatic Door Force Setup

Automatic Door Force Setup

How the opener automatically measures and adjusts door force for smooth operation.

Safety Reversal System Test

Safety Reversal System Test

Test to ensure the door reverses upon encountering an obstruction.

Programming Remote Controls

To Add or Remove a Remote Control

Steps to program or delete remote controls for accessing the opener.

To Remove All Remote Controls

Programming Wireless Keypad Codes

To Add or Remove a Wireless Keypad Code

Steps to program or delete access codes for the wireless keypad.

Setting Up the Wifi Wall Station

Linear App

Add Your Device

Use the Linear app

Maintenance

Every Month

After Servicing the Opener

Belt Adjustment

Troubleshooting

Precision ULTRA 900 Specifications

General

Brand	Precision
Model	ULTRA 900
Category	Garage Door Opener
Language	English