3. ADJUST THROTTLE
6. CHOKE TO RUN
2. OPEN FUEL VALVE
STOP
Starting Procedure
Add Fluids
Check oil and fuel levels
If needed, fill as shown below
Add fuel to within
1" of the rim of the tank
Add oil to engine
crankcase
Assembly
Note: Use regular Unleaded 87 Octane.
Engine not designed for E85 Ethanol blend.
Mount the engine
securely in place
1. CLOSE CHOKE
O
I
ON
4. SWITCH ON
5. PULL START
Move 1/3
toward fast
IMPORTANT: Breaking-in the engine will help to ensure proper equipment and engine performance.
The operational break-in period will last about 3 hours of use.
During this period: • Do not apply a heavy load. • Do not operate the engine at its maximum speed.
TM
To Previous Page
Loading...
Need help?
General
