Predator 63405 - Page 2

Page 2 For technical questions, please call 1-888-866-5797. ITEM 63405
Table of Contents
Specifications ............................................. 2
Safety ......................................................... 4
Setup .......................................................... 6
Operation ................................................... 10
Maintenance .............................................. 13
Troubleshooting ......................................... 17
Warranties ................................................. 20
Parts Lists and Diagrams .......................... 22
Specifications
Pump
Suction & Discharge Size 2" NPT
Maximum Flow at 0’ 158 GPM
Maximum Head Lift at 0 Flow 91 ft.
Maximum Intake Lift at 0 26 ft.
Mechanical Seal Ceramic
Included Accessories Intake Strainer, Hose Clamps, Spark Plug Wrench
Engine
Displacement 212cc
Engine Type
Horizontal Single Cylinder 4 stroke OHV
EPA phase III compliant
Cooling System Forced air cooled
Fuel
Type 87+ octane stabilizer-treated unleaded gasoline
Capacity 0.9 Gallons / 3.6 Liters
Engine Oil
Type SAE
10W-30 above 32° F
5W30 at 32° F or below
Capacity 0.5 Quarts / 0.5 Liters
Run Time @ 50% Load with full tank 3 hr.
Sound Level at 22 feet 104 dB
Bore x Stroke 70 mm x 55 mm
Compression Ratio 8.5:1
Rotation viewed from PTO
(power takeoff - the output shaft)
Counterclockwise
Shaft
Shaft 3/4" x 2.41"
Keyway 3/16" (4.76 mm)
End Tapped 5/16" - 24 UNF
Spark Plug
Type
NGK
®
BP-6ES
NHSP
®
/ Torch
®
F7TC
Gap 0.027" - 0.031"
Valve Clearance
Intake 0.004" - 0.006"
Exhaust 0.006" - 0.008"
No Load Speed 3,800 ±100 RPM
Discharge Head (ft.)
PERFORMANCE CURVE
Flow (Gallons/minute)