WARNING: Trafc in the city has many obstacles to cross such as curbs or steps. Please
avoid obstacle jumps. It is important to anticipate and adapt your trajectory and speed to those of a
pedestrian before crossing these obstacles. It is also recommended to get out of the vehicle when
these obstacles become dangerous due to their shape, height or slippage.
- Take time to learn the basics of the practice to avoid any serious accident that can take place in
the rst months;.
- Get closer to your seller so he can refer you to an appropriate training organization.
- In any case, anticipate your trajectory and your speed while respecting the code of the road, the
code of the sidewalk and the most vulnerable.
- Notify your presence when approaching a pedestrian or cyclist when you are not seen or heard.
- Avoid high trafc areas or overcrowded areas.Cross the protected passages while walking.
- In all cases, take care of yourself and others.Do not divert the use of the vehicle.,This vehicle is
not intended for acrobatic use.
- Caution, the brake may become hot in use. Do not touch after use.
- Regularly check the tightening of the various bolted elements, in particular the wheel axles, the
steering system and the brake shaft.
- Do not modify or transform the vehicle, including the steering tube and sleeve, stem, folding
mechanism and brakes.
9. Problem solving
PROBLEM CAUSE SOLUTION
Motor
doesn’t start
Kick to start
feature
Check Chapter8.Prepare to ride.
Power
Switch
Turn on the power and the display; check Chapter8. Prepare to ride.
Battery won’t
be able to
charge
Charging
port
Charge battery individually, if function properly, contact local dealer to
replace charge port on the electrical compartment
Battery
charger
Check wall outlet / charger / charging plug for looseness, if so,
change or reconnect it and try again.
Scooter runs
sluggish
Over Heat
Faulty adjustment of brake system can cause high resistance to
entire system. Check Chapter 10 to correctly adjust brake system.
Brake pad
Faulty brake sensor can cause scooter to stop unintentionally. Check
and brush to clean the gap of brake lever. Make sure brake cable
smoothly rebound to its original position after each brake. If the
problem cannot be solve, contact your local dealer to solve such
issue as soon as possible.
Pull the
brake but
motor is still
running
Brake sensor
The brake sensor is design to stop motor after its activation of 2~3
second for the confort and smooth ride. The mechnical brake should
alwasys out perform the motor stop feature. Apply brake leaver with
gental but strong foces to provide max brake performances. One
should never push the throttle while using the mechnical brake. If one
found faulty brake sensor, switch OFF the scooter immediately. Stop
using the scooter and contact your local dealer. Do not use it again
before the problems have been solve.
For further questions in regards of the scooter, please contact your local dealer.
To Next Page
Loading...