Need help?Do you have a question about the Pregis MINI PAK'R V3 and is the answer not in the manual?
Essential guidelines for safe operation and user protection.
Identifies external parts of the MINI PAK'R V3 machine.
Identifies the parts of the film roll and its holder.
Steps to connect the machine to a power source.
Instructions for placing the film roll onto the machine.
Guides on how to thread the film through the machine.
Process for advancing the film to the correct position.
Steps to safely disconnect the machine from the power supply.
Instructions for opening the protective cover.
Procedure to release the control panel from the cover.
Steps for securely closing the machine's top cover.
How to adjust the orientation of the control panel.
Guides on placing the panel back into the cover and routing cables.
Verifies the correct placement of the green flat cable.
Final steps to click and lock the control panel in place.
Explains the display, LEDs, and control buttons for basic machine operation.
Details the steps to begin producing air cushions after the machine is ready.
Allows manual adjustment of automatic settings like length, fill level, and seal temperature.
Details options for continuous mode and setting a fixed number of cushions.
Important safety warning about potential burns from hot machine parts.
Steps to improve the film cutting performance by adjusting the slitting blade.
General| Dimensions | 13" L x 12" W x 11" H |
|---|---|
| Weight | Not available |
| Air Supply | Internal Air Compressor |
| Power | 110V or 220V |
| Film Type | HDPE |
| Film Width | Varies by film type |
| Speed | 30 ft/minute |
| Machine Type | Inflatable Cushion Packaging Machine |
| Power Requirements | 110V or 220V |
| Packaging Material | HDPE film rolls |
| Production Speed | 30 ft/minute |
| Bag Size Range | Varies by film type |
To Next Page
