message “d or E8X”, alerting the user of the presence of a suspicious money. Remove
the counterfeit money and press “START” to continue counting.
Total Value Calculation Mode
The Total Value Calculation function is selected or deselected by MODE or VALUE
button. Keep pressing MODE or VALUE button for 2 seconds to exit this function. The
machine can provide a grand total of the denominations counted. Each
denomination must be counted separately.
Single Denomination Total Value Calculation:
Press MODE or VALUE to select denomination firstly and then place the same
denomination banknotes in the hopper, display will show total numbers and total
value after finish counting.
Multi-Denomination Total Value Calculation:
Turn on ADD button, then press MODE or VALUE to select denomination and then
place the same denomination banknotes in the hopper.
Select next denomination and repeat process above.
After all denominations are have been counted, display will show total numbers,
total value and numbers of each denomination.
Automatic or Manual Counting Mode
Automatic Start Mode: The machine begins counting automatically when banknotes
are placed in the hopper.
Manual Start Mode: Press “START” button to start counting after banknotes are
placed in the hopper.
Batch Function
The batch function can be selected or deselected by pressing the "Batch" button. The
batch number will show on batch display.
First Press: the batch number is 100
Second Press: the batch number is 50
Third Press: the batch number is 20
Fourth Press: the batch number is 10
Fifth Press: the batch function is canceled.
The customized quantity can be set by pressing "+" or "-" button to increase or
decrease the batch number. If keep pressing "+" or "-" button for about 2 seconds,
the batch number can increase or decrease continuously. If the machine has number
keys, you can set the batch number much more convenient. To clear this function,
press the "BATCH" button until the indicator is off.
To Next Page
Loading...
Need help?
General
