Premax PM-CC85A - Common Troubles and Solution

CE4
Problem with right counting
sensor
Clean the sensor or replace it
CE5
Problem with hopper sensor
Clean the sensor or replace it
CE7
Problem with MG sensor
Replace the MG sensor
CE8
Problem with stacker sensor
Clean the sensor or replace it
Generally speaking, most of the above mentioned problems may be caused by dust
or dirt inside of the machine. So keeping the machine clean is highly recommended.
Common Troubles and Solution
Before repair, please check the problems as below:
NOTE: before solve the problem, you must turn off power switch and unplug the
outlet.