EasyManua.ls Logo

premiere SVR 380 MD User Manual

premiere SVR 380 MD
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating Instructions
Mode demploi
Bedienungsanleitung
Gebruiksaanwijzing
Instrucciones de funcionamiento
Modo de usar
Istruzioni per luso
SVR 380 MD
Premiere Products
2 - 9
10 - 17
18 - 25
26 - 33
34 - 41
42 - 49
50 - 57
WARNING! Read Instructions before using the machine
Question and Answer IconNeed help?

Do you have a question about the premiere SVR 380 MD and is the answer not in the manual?

premiere SVR 380 MD Specifications

General IconGeneral
Brandpremiere
ModelSVR 380 MD
CategoryFloor Machine
LanguageEnglish

Summary

Introduction

Read the Instructions

General preamble advising users to read all instructions before operating the machine.

Quality Control Procedures

Approvals

Technical Information

Machine Care

Before Use

Guidance on checking voltage, wiring, and plug suitability before initial operation.

Cables and Extension Leads

Advice on using specified cables and extension leads for safe and efficient operation.

Fitting and Removing Accessories

Fitting/Removing Multi-Disc Accessories

Detailed steps for attaching and detaching multi-disc accessories, including alignment.

Assembly and Operation of Vacuum Units

To fit Paper Bags

Instructions for replacing disposable paper bags and cleaning the cloth filter bag.

To Operate

Steps to connect and start the vacuum unit, noting a built-in delay.

Operation of PV5 Series

Operation of Overload Switch

Cleaning Methods

To Shampoo Carpets

Procedure for shampooing carpets using standard velocity machines.

To Scrub Floors

Procedure for scrubbing floors using standard velocity machines.

Servicing

If the machine will not start

Troubleshooting steps for a machine that fails to start, including fuse and power checks.

Troubleshooting

If motor runs hot and lacks power

Checks for motor overheating or power loss, focusing on air intake and blockages.

If fuses persistently blow or overload switch constantly trips

Diagnosing persistent fuse blowing or overload trips, checking extensions and usage.

If machine unbalanced in operation

Addressing machine imbalance by checking accessories, thickness, and wear.

If the SVR 380 MD vacuum unit lacks power

Troubleshooting low power in the vacuum unit, checking skirt, hoses, and filter.

Guarantee

Health and Safety at Work Act 1974

Electricity at Work Regulations 1989