SWIVEL CLAMP OPERATION
Different strings and different gauges require different adjustments. Adjustment can
usually be done by finger tips. Note that the handle of the swivel clamp should be
lifted before adjustment.
SWIVEL CLAMP BASE OPERATION
The lever on the swivel clamp base is turned clockwise to lock the base. To unlock,
the lever is turned counterclockwise. If the swivel clamp base doesn’t lock well to the
turntable or the locking angle of the lever of the clamp base is too big, you may adjust
the nut beneath the clamp base by a 17 mm wrench clockwise or counterclockwise.
Closed Position Open Position
To Previous Page
Loading...
