Description of the Blender
Instructions
1. Skin & seed the ingredients, then slice them into 15mm cubes.
2. The ratio of ingredients to water is 2:3.
3. Put the ingredients into the jar then add water, milk etc. (Max capacity—1500ml)
4. Cover with lid & fit the jar to housing, lock by turning clockwise till
and match.
5. Make sure the unit is OFF when plugging in.
6. Choose the speed you prefer.
Warning
1. Don’t dismantle the unit while in operation.
2. If the motor is stalled or abnormal vibration & noise is found while in operation, please
plug off and check whether the unit is overloaded. In that case, please lessen the
amount of mixture. If the motor is stalled and could not operate. Please ask for help
from the maintenance department.
3. Please operate with ON 1s, then OFF 1s to ensure the life-span of the unit.
4. Don’t operate without load.
Model PB348 Item Blender
Spec. 120V-60HZ 350W Capacity 1250ml
Dimensions L204*W195*H390 Power Cord Exterior 0.65m
Weight 1.45Kg Operating ON 1s/OFF 1s
3
Care and Maintenance
1. Plug off before cleaning to avoid short circuit and hazards.
2. Wipe the unit with clean damp cloth.
3. Don’t use harsh or abrasive cleansing agents or solvents.
4. Don’t put any part of the unit in a dishwasher.
5. Take great care when handling the sharp blade.
6. When cleaning the jar interior, please add 1/3 water; Lid
the jar correctly, power on and let the unit run for a while.
7. Don’t immerse the unit in water.
4
1500ml
To Next Page
Loading...