Need help?Do you have a question about the PRESIDENT BARRY II and is the answer not in the manual?
General| Type | CB Radio |
|---|---|
| Channels | 40 |
| Modulation | AM/FM |
| Antenna Impedance | 50 ohms |
| Frequency Range | 26.965 MHz to 27.405 MHz |
| Power Output | 4 W |
Key microphone functions including PA, PTT, Talkback, and Noise Gate.
Explanation of primary controls on the front panel like volume, squelch, and channel selectors.
Description of the various connectors located on the rear panel of the transceiver.
Warning against transmitting without a connected antenna or proper SWR adjustment to prevent damage.
Guidance on using the multi-norms transceiver, referencing specific functions and tables.
Instructions on choosing a suitable location, avoiding interference, and securing the CB radio in a vehicle.
Details on using the provided cradle and screws for mounting, including drilling precautions.
Advice for dashboard mounting, including the need for an external speaker.
Advice on choosing and mounting antennas, including mobile and fixed types, and ground plane considerations.
Steps for connecting the CB radio to the vehicle's power supply, including polarity checks and fuse warnings.
Steps to follow before the first transmission, including connecting microphone, antenna, and setting initial controls.
Detailed instructions for adjusting the Standing Wave Ratio (SWR) using an external meter for optimal performance.
How to turn the unit on and adjust the volume level.
Explanation of the display and how to change channels using unit buttons or microphone knobs.
Explanation of the Squelch and Automatic Squelch Control (ASC) features for noise reduction.
How to manually set the squelch level for optimal reception.
Guide to selecting the correct frequency band for the country of use.
Explanation of selecting modulation modes (AM/FM), Noise Blanker (NB), and Compander features.
How to activate, store, and use emergency channels.
Instructions for using the VOX (Voice Operated Exchange) feature and adjusting its settings.
Information on using the USB port and details about the 6-pin microphone plug.
Explanation of PTT, Time Out Timer, and microphone channel selection features.
Description of various connectors on the unit, including power, antenna, and speaker jacks.
How to enable or disable the Roger Beep notification sound.
How to control key beeps and select frequency bands via power-on key presses.
How to change display color and reset the device to factory settings.
How to activate/deactivate Talkback and adjust its audio feedback level.
How to activate Public Address mode and the Noise Gate feature for background noise reduction.
Overview of general characteristics and technical details related to transmission.
Technical details related to reception, including sensitivity, selectivity, and audio power.
Steps to diagnose and resolve issues with transmitting or poor transmission quality.
Steps to resolve problems with receiving signals or if the unit fails to power on.
Guide on how to make a transmission and receive a reply.
Definitions of common technical terms and phonetic words used in CB radio.
A collection of CB slang terms and their meanings.
Official declaration of compliance with EU directives for the specific equipment model.
Details the standard 2-year warranty, extension options, and return procedures.
Lists conditions not covered by warranty and troubleshooting steps before service.
Advice on keeping related documents for future reference or resale.
To Next Page